Items where Author is "Cvetkov, Slavco"

Trajchevski, Neven and Kukutanov, Risto and Cvetkov, Slavco (2022) Елаборат со анализа за можностите за производство на наменски специјални алати и делови за автомобилската индустрија во РСМ. КОРТЕК МБ – Скопје.

Cvetkov, Slavco and Trajchevski, Neven and Dimitrov, Sasko (2022) Конвенционални и нумерички управувани металорезачки машини и помагала. Универзитет „Гоце Делчев“ – Штип. ISBN 978-608-244-907-4

Milev, Sasko and Simeonov, Simeon and Simonovski, Petar and Avramov, Nikola and Milev, Sasko and Cvetkov, Slavco (2017) The stress variation by changing the supporting point location in the motor vehicle clutch assembley. Trans Motauto World (6). pp. 230-235. ISSN 2367-8399

Milev, Sasko and Simeonov, Simeon and Simonovski, Petar and Avramov, Nikola and Dimitrov, Sasko and Cvetkov, Slavco (2017) The stress variation by changing the supporting point location in the motor vehicle clutch assembly. In: MTM Congres, 13 Sept 2017, Varna, Bugaria.

Dimitrovski, Zoran and Dimitrov, Sasko and Cvetkov, Slavco and Kukutanov, Risto (2017) Condition of the pesticide aplication equipment in part of the Mediterranean region in the Republic of Macedonia. In: 45. Međunarodnog simpozija iz područja mehanizacije poljoprivrede, 21-24 Feb 2017, Opatia, Croatia.

Dimitrovski, Zoran and Dimitrov, Sasko and Cvetkov, Slavco and Jakimovska, Svetlana (2017) An overview of the pesticide application equipment in Ovcepole region in Republic of Macedonia. In: Sixth European Workshop on Standardised Procedure for the Inspection of Sprayers in Europe SPISE 6, Barcelona.

Simeonov, Simeon and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko (2016) Dynamic Strain of Diaphragm Spring on Vehicles Friction Clutches Depending on the Spring Angle. International Journal of Scientific & Engineering Research, 7 (4). pp. 1448-1452. ISSN 2229-5518

Simeonov, Simeon and Sovreski, Zlatko and Cvetkov, Slavco and Dzidrov, Misko and Dimitrov, Sasko (2016) Влијание на температурата врз триболошките параметри на фрикционите спојки за моторни возила. Predavanja po pozivu sa megjunarodnim ucescem, Savetovanje u Kostolcu. ISSN 978-86-912927-5-1

Dzidrov, Misko and Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko and Stefanovska Ceravolo, Ljubica (2015) Study on the Importance of Knowledge, Innovation and Entrepreneurship on the Country’s Progress. International Journal of Scientific & Engineering Research, 6 (11). pp. 913-917. ISSN 2229-5518

Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko and Dzidrov, Misko and Dimitrov, Sasko (2015) Impact of graphite and sooton the tribological parameters of the friction lining for the motor vehicles clutches. Годишник на висше училище по телекомуникации и пощи, 1 (1). pp. 25-29. ISSN 2367-8437

Simeonov, Simeon and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko (2015) Impact of the Thread Diameter on the Tribological Parameters of the Friction Lining for the Motor Vehicles Clutches. International Journal of Scientific & Engineering Research, 6 (10). pp. 1101-1105. ISSN 2229-5518

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2015) Static Characteristics of the Orifices in a Pilot Operated Pressure Relief Valve. Hydraulica, Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics (2/2015). pp. 34-38. ISSN 1453-7303

Sovreski, Zlatko and Simeonov, Simeon and Dzidrov, Misko and Cvetkov, Slavco and Dimitrov, Sasko and Kukuseva, Maja (2015) Заштита од пожара са економског аспекта у енергетици. Међународно саветовање: Oдрживи развој Браничевског округа и енергетског комплекса Костолац, 1 (S15). pp. 164-172. ISSN ISBN 978-86-919499-0-7

Sovreski, Zlatko and Dzidrov, Misko and Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko (2015) Енергетска ефикасност као енергетска карактеристика термалних система у републици Македонији. Међународно саветовање: Oдрживи развој Браничевског округа и енергетског комплекса Костолац, 1 (S15). pp. 67-69. ISSN ISBN 978-86-919499-0-7

Simeonov, Simeon and Sovreski, Zlatko and Cvetkov, Slavco and Dzidrov, Misko and Milev, Sasko (2015) Утицај дебљине чиниесте пружине у спојке моторних возила врз њихове напоне. Браничевског округа и енергетског комплекса Костолац, Костолац, мај 2015, 1 (S15). pp. 87-92. ISSN ISBN 978-86-919499-0-7

Dimitrovski, Zoran and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko and Jakimovska, Svetlana and Stojanova, Teodora (2015) Воведување на нови стандарди за задолжителна инспекција на машините и опремата за апликација на пестициди. [Project] (Submitted)

Simeonov, Simeon and Mirakovski, Dejan and Cvetkov, Slavco and Simonovski, Petar and Cekerovska, Marija and Milev, Sasko (2015) Примена на Mетодата на конечни елементи при пресметка на чиниести пружини на фрикциони спојки кај моторните возила. [Project]

Cvetkov, Slavco and Kocov, Atanas (2014) Experimental analysis for defining forming limit diagram for thick sheets. Journal for Technology of Plasticity, 39 (2). pp. 47-54. ISSN 0354-3870-UDC 621.7

Dzidrov, Misko and Cvetkov, Slavco and Stojanova, Teodora and Krstev, Aleksandar (2014) Influence of innovation and entrepreneurship on the economic growth. In: 6th International Conference on Mass Customization and Personalization in Central Europe (MCP-CE 2014), 24–26 Sept 2014, Novi Sad, Serbia.

Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko and Dzidrov, Misko and Milev, Sasko (2014) Фрикционе материјале за спојнице моторна возила. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 182-190. ISSN 978-86-912927-3-7

Dzidrov, Misko and Mirakovski, Dejan and Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko (2013) Economic Freedom And Conflicts Tendencies In The Balkan Countries. International Journal of Scientific & Technology Research, 2 (10). pp. 47-50. ISSN 2277-8616

Dzidrov, Misko and Mirakovski, Dejan and Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko (2013) Relationship between economic freedom and conflict in the Balkan region. International Journal of Scientific & Engineering Research, 4 (10). pp. 433-436. ISSN 2229-5518

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikolce and Paspalovski, Toni and Simeonov, Simeon and Cvetkov, Slavco and Josheski, Dushko (2013) Енергетска ефикасност и економска оправданост индивидуалног станбеног објекта преко побољшања топлинске изолације. Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac, 2013, 300 (342). pp. 185-191. ISSN 978-86-912927-2-0

Simeonov, Simeon and Cvetkov, Slavco and Danev, Darko and Sovreski, Zlatko and Dimitrov, Sasko (2013) Impact of metal wire on the tribological parameters of the fiction lining. In: Proceedings in Global Virtual Conference, 8-12 Apr 2013, Zilina, Slovak Republic.

Cvetkov, Slavco and Dimitrov, Sasko and Simeonov, Simeon and Sovreski, Zlatko and Dzidrov, Misko (2013) Influence of the position of an aperture derived in the initial material on the drawing workability of the cold rolled metal sheets. In: GV-CONF 2013, 8-12 Apr 2013, Zilina, Slovak Republic.

Cvetkov, Slavco and Kocov, Atanas and Spiroski, Zoran (2012) Stress state in the process of deep drawing of sheet metal cover as a part of a clutch cover for commercial motor vehicles. Journal for Technology of Plasticity, 37 (2). pp. 143-152. ISSN 0354-3870

Simeonov, Simeon and Danev, Darko and Cvetkov, Slavco and Sovreski, Zlatko and Dimitrov, Sasko (2012) Optimization of diaphragme springs for clutches motor vehicles clutches. Proceedings of Electronic International Interdisciplinary Conference 2012. pp. 630-635. ISSN 1338-7871

Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko and Sovreski, Zlatko (2012) Influence of the number of the clutch engagement on the wearing of friction linings of clutches for motor vehicles. Technical Gazette, 19 (2). pp. 447-449. ISSN 1330-3651

Cvetkov, Slavco and Kocov, Atanas (2012) Production of complex parts by deep drawing - deformation analysis. Journal for Technology of Plasticity, 37 (1). pp. 85-91. ISSN 0354-3870-UDC 621.7

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2011) Experimental verification of a mathematical model of static characteristics of pilot operated pressure relief valves. Engineering Sciences, XLVIII (4).

Cvetkov, Slavco and Kocov, Atanas (2011) Influence of the size of an hole derived in the initial material on the drawing workability of the cold-rolled metal sheets. 8th ICIT&MPT 2011, 368 (8). pp. 83-86.

Cvetkov, Slavco and Simeonov, Simeon and Dimitrov, Sasko (2011) Influence of the placement of a previously derived ellipse shaped aperture in the starting material on the processing with drawing of the cold rolled sheet steels. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials) (7). pp. 41-43. ISSN 1313-0226

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2011) Dynamic characteristics research of direct acting pressure relief valves through frequency response methods. In: Fluidna tehnika 2011 - Fluid Power 2011, 15-16 September 2011, Maribor, Slovenia.

Cvetkov, Slavco and Kocov, Atanas (2010) Influence of the surface quality due to a hole derived in initial material processing of cold sheets with drawing. Mechanical Engineering -Scientific Journal, 29 (1). pp. 47-51. ISSN 1857-5293