Items where Author is "Kuzinovski, Mikolaj"

Group by: Item Type | No Grouping

Number of items: 35.

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Stevanoski, Goce (2022) Evaluation of the uncertainty contribution of the natural thermocouple characteristics in the empirical modelling of temperature during metal cutting process. Mechanical Engineering – Scientific Journal, 40 (1). pp. 5-10. ISSN 1857–5293

Trajchevski, Neven and Sarac, Vasilija and Kuzinovski, Mikolaj (2019) Determination of the influence of the natural thermo-couple thermo-voltage characteristics in the modelling of machining processes by turning. In: 14th International conference of applied electromagnetics PES-2019, Nis, R. Serbia.

Trajchevski, Neven and Sarac, Vasilija and Stefanov, Goce and Kuzinovski, Mikolaj and Tomov, Mite (2018) Integrated Machining Process Modelling and Research System. In: Applied Computer Technologies.

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2018) Outlook on measurement, uncertainty and mathematical representation of the physical phenomena that occur in machining processes. In: The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018), 6–8 June 2018, Novi Sad, Serbia.

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2018) Reducing of process model uncertainty towards smart machining systems. Mechanik (10). pp. 877-879. ISSN 0025-6552

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Cichosz, Piotr (2015) Introducing of measurement uncertainty in empirical power models of physical phenomena during machining processes. Mechanik (08/09). pp. 55-62. ISSN 0025-6552

Ristova, Emilija and Gecevska, Valentina and Kuzinovski, Mikolaj and Panov, Zoran (2015) Methods and techniques for industrial development. Chapter 14 - Hybrid cloud computing model and its challanges. Project Report. Faculty of Mechanical Engineering, Maribor, Slovenia.

Tomov, Mite and Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr and Skowronek, Hubert (2014) Influence of the end effects on roughness parameters for short non-periodic profiles. In: 37th Naukowa Szkoła Obróbki Ściernej, 23-25 Sept 2014, Kolobrzeg, Poland.

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2014) Monte Carlo simulations in validation of measurement uncertainty of cutting force during machining by turning. Górnictwo Odkrywkowe, 55 (4-5). pp. 116-120. ISSN 0043-2075

Kuzinovski, Mikolaj and Trajchevski, Neven and Tomov, Mite and Cichosz, Piotr and Skowronek, Hubert (2014) An approach for measurement uncertainty evaluation of cutting force in machining by turning. Mechanik (08/09). pp. 55-62. ISSN 0025-6552

Ristova, Emilija and Gecevska, Valentina and Kuzinovski, Mikolaj and Mirakovski, Dejan (2013) Cloud computing as business perspectives for product lifecycle management systems. In: Development of intelligent and innovative tools for production process engineering and sustainable management. University of Maribor, Faculty of Mechanical Engineering, pp. 176-184.

Kuzinovski, Mikolaj and Cichosz, Piotr and Trajchevski, Neven and Tomov, Mite (2012) Computer aided engineering of the surface layer in the machining process by material removal. Systems, Journal of Transdisciplinary Systems Science, 16 (2). pp. 25-41. ISSN 1427-275X

Kuzinovski, Mikolaj and Trajchevski, Neven and Tomov, Mite and Cichosz, Piotr (2010) Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process. Górnictwo Odkrywkowe, 3. pp. 148-153. ISSN 0043-2075

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Analysis of the possible influence in determining of the roughness profile in real non-periodic surfaces by application of Gaussian and 2RC filters. In: 33rd Naukowa Szkoła Obróbki Sciernej, Politechnika Łódzka, Wydział Mechaniczny, 8-10 Sept 2010, Lodz, Poland.

Tomov, Mite and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Function on Gaussian and 2RC filters to determine the roughness profile in real non-periodic and periodic surfaces. In: 14-th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2010, 11-18 Sept 2010, Mediterranean Cruise.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Investigation of the function and influence of Gaussian and 2RC filters to determine of roughness profile on real periodic surfaces. In: IV Konferencja Naukowa, Szkoła Obróbki Skrawaniem, Politechnika Łódzka, Wydział Mechaniczny, 6-8 Sept 2010, Lodz, Poland.

Kuzinovski, Mikolaj and Dukovski, Vladimir and Vrtanovski, Gligorce and Zebrovski, Henrik and Josifovski, Vasko and Petrov, Aleksandar and Tomov, Mite and Trajchevski, Neven and Tasev, Toni and Fita, Stanislaw and Cichosz, Piotr (2009) Истражување на можностите и точноста на отсликување на геометриската структура на површината од површинскиот слој со контактни профилометри. [Project]

Kuzinovski, Mikolaj and Cichosz, Piotr and Zebrowski, Henryk and Fita, Stanislaw and Tomov, Mite and Trajchevski, Neven and Tasev, Toni and Stojanovski, Zoran and Petrov, Aleksandar and Kostovski, Vladimir (2009) Разработка на методологија за едукација во областа на определувањето и проценката на неодреденоста како и грешките во мерењето. [Project]

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 29-32. ISSN 1821-4932

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Trajchevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 47-50. ISSN 1821-4932

Trajchevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Tomov, Mite and Cichosz, Piotr (2009) Monitoring system for automation of experimental researches in cutting. Mechanical Engineering – Scientific Journal, Proceedings, 28 (2). pp. 41-60. ISSN 1857 – 5293

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2008) Automation of experimental investigation of physical phenomena in the cutting process by machining with turning. In: XXXII Conference on production engineering SPMS 2008, 18-20 Sept 2008, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Cichosz, Piotr and Zebrowski, Henryk and Fita, Stanislaw and Tomov, Mite and Trajchevski, Neven and Josifovski, Vasko and Tasev, Toni (2006) Метрологија на геометриските карактеристики во функција на лабораториите за калибрација, производните и едукативните процеси. [Project]

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Computer aided system for investigation of cutting forces and temperature in turning. Górnictwo Odkrywkowe (7-8). pp. 10-14. ISSN 0043-2075

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Developing a data acquisition system for force and temperature measurement in the cutting process by machining with turning. In: Proceedings of the 8-th international scientific conference "New ways in manufacturing technologies 2006", 22-23 June 2006, Prešov, Slovak Republic.

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr and Tomov, Mite (2006) Monitoring system for investigation of the cutting forces in the machining with turning. In: Proceedings of the 9-th International Scientific Conference "MMA 2006 Flexible Technologies", 15-16 June 2006, Novi Sad, Srbija.

Kuzinovski, Mikolaj and Trajchevski, Neven and Fita, Stanislaw and Tomov, Mite (2006) Monitoring system in the experimental investigations of the temperature in the cutting process by machining with turning. In: Proceedings of the 9-th CIRP international workshop on modeling of machining operations, 11-12 May 2006, Bled, Slovenia.

Kuzinovski, Mikolaj and Zebrowski, Henryk and Cichosz, Piotr and Tomov, Mite and Trajchevski, Neven and Nedelkovski, Mirce and Jovchevski, Ljupco and Kevilovski, Ognen and Kitanovski, Kire and Tiricovski, Dragi and Gonovski, Blagoja and Josifovski, Vasko (2005) Развој и воведување на методологија за определување на цената на чинење на услугите и производите во функција од бараното ниво на квалитет. [Project]

Trajchevski, Neven and Kuzinovski, Mikolaj and Filiposki, Velimir and Cichosz, Piotr (2004) Computer aided measurement of the temperature in the cutting process by machining with turning. In: Proceedings of the scientific conference with international participation "Manufacturing and menagement in 21-st century", 16-17 Sept 2004, Ohrid, Republic of Macedonia.

Trajchevski, Neven and Filiposki, Velimir and Kuzinovski, Mikolaj (2004) Personal computer interface for temperature measuring in the cutting process with turning. Proceedings, Faculty of Mechanical Engineering - Skopje, 23 (2). pp. 65-74. ISSN 0351-6067

This list was generated on Sun Nov 24 04:20:17 2024 CET.