Items where Author is "Srebrenkoska, Sara"

Dimitrov, Sasko and Srebrenkoska, Sara and Krstev, Dejan and Dzidrov, Misko and Cekerovska, Marija and Cekerovski, Todor (2024) Theoretical research on transient process in hydraulic cyl-inder with conical cushioning devices. In: The 12th International Conference on Machine and Industrial Design in Mechanical Engineering (KOD 2024), 23-26 May 2024, Balatonfüred, Hungary.

Srebrenkoska, Sara and Srebrenkoska, Vineta and Cekerovska, Marija and Cekerovski, Todor (2024) Design and Calculation of Products from Composite Materials Using Software. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 28. pp. 252-258. ISSN 2602-3199

Cekerovska, Marija and Cekerovski, Todor and Srebrenkoska, Sara and Dimitrov, Sasko (2024) Performance and Design Optimization of Solar Collectors. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 28. pp. 470-476. ISSN 2602-3199

Srebrenkoska, Sara and Krstev, Dejan and Dimitrov, Sasko and Risteska, Aleksandra (2024) Designing Technological Process for Composite Pipe Production Using Software. Advances in Robotics & Mechanical Engineering, 4 (3). pp. 593-600. ISSN 2643-6736

Mirakovski, Dejan and Lazarov, Darko and Srebrenkoska, Sara and Zendelska, Afrodita and Krcheva, Violeta (2024) Циркуларна и зелена економија базирана на соработка наука-бизнис. [Project] (Unpublished)

Despot, Katerina and Srebrenkoska, Sara and Sandeva, Vaska (2023) The role of artificial intelligence in automotive design. Knowledge – International Journal, 61 (3). pp. 423-429. ISSN 2545-4439

Krstev, Dejan and Srebrenkoska, Sara and Cekerovska, Marija (2023) Forecasting and prediction by mean of Analytic Hierarchy Process (AHP) in the field of supply chains. Natural Resources and Technology, 17 (2). ISSN 1857-6966

Krcheva, Violeta and Dzidrov, Misko and Srebrenkoska, Sara and Krstev, Dejan (2023) Gantt chart as a project management tool that represents a clutch hub manufacturing process. Balkan Journal of Applied Mathematics and Informatics (BJAMI), 6 (2). pp. 67-78. ISSN 2545-4803

Krstev, Dejan and Srebrenkoska, Sara (2023) Modeling and simulation of certain and real conditions through limits to growth and tragedy of the commons archetypes. Journal of Multidisciplinary Engineering Science and Research (JMESR), 2 (11). pp. 251-255. ISSN 2632-1017

Srebrenkoska, Sara and Apostolova, Aleksandra and Dzidrov, Misko and Krstev, Dejan (2023) Application of Analytical Hierarchy Process (AHP) in the selection of a flexible production system. Engineering World, 5. pp. 138-143. ISSN 2692-5079

Srebrenkoska, Sara and Krstev, Dejan and Cekerovska, Marija (2023) Analysis of an inventory management model in a manufacturing process based on material requirements planning (MRP). International Journal of Advanced Natural Sciences and Engineering Researches (IJANSER), 7 (9). pp. 91-93. ISSN 2980-0811

Srebrenkoska, Sara and Krstev, Dejan and Cekerovska, Marija (2023) Analysis of an inventory management model in a manufacturing process based on material requirements planning (MRP). In: 3rd International Conference on Innovative Academic Studies ICIAS 2023, 26-28 Sept 2023, Konya, Turkey.

Srebrenkoska, Sara (2023) COST Action CA22132, Open Network on DEM Simulations (ON-DEM). [Project] (In Press)

Srebrenkoska, Sara and Avramovska, Ivana and Krcheva, Violeta (2023) Analysis of Steel Construction, Construction of a Canopy in the Function of a Facility for Light Industry. International Journal of Research Publication and Reviews (IJRPR), 4 (10). pp. 216-220. ISSN 2582-7421

Srebrenkoska, Sara and Krstev, Dejan and Dimitrov, Sasko and Tanceva, Nevena (2023) Application of Artificial Intelligence in Mechanical Engineering. Journal of Multidisciplinary Engineering Science and Research (JMESR), 2 (10). pp. 248-250. ISSN 2632-1017

Stoicovska, Marija and Vielickova, Frosina and Srebrenkoska, Sara and Risteska, Svetlana and Risteski, Sanja and Srebrenkoska, Vineta (2023) Utilizing Vacuum Bagging Process to Prepare Carbon/Epoxy Composite Laminates. Contemporary trends and innovations in the textile industry. pp. 181-185. ISSN ISBN: 978-86-900426-6-1

Srebrenkoska, Sara and Krstev, Dejan (2023) Technical and Economic Analysis of Different Types of Composite Pipes Compared to Conventional Pipes for the Same Purpose. Engineering Technology Open Access Journal (ETOAJ), 5 (3). ISSN 2641-8185

Srebrenkoska, Sara and Kochoski, Filip and Srebrenkoska, Vineta and Risteska, Svetlana and Kotynia, Renata (2023) Effect of Process Parameters on Thermal and Mechanical Properties of Filament Wound Polymer-Based Composite Pipes. Polymers, 15 (13). ISSN 2073-4360

Srebrenkoska, Sara and Kochoski, Filip and Srebrenkoska, Vineta and Risteska, Svetlana and Kotynia, Renata (2023) Effect of Process Parameters on Thermal and Mechanical Properties of Filament Wound Polymer-Based Composite Pipes. Polymers 2023 Special Issue Development in Thermosetting Polymers, 15 (13).

Velichkovska, Frosina and Stojchevska, Maja and Srebrenkoska, Sara and Risteska, Svetlana and Srebrenkoska, Vineta (2023) Properties of Composite Parts Manufactured using UD Carbon Fiber/Epoxy Prepreg. International Journal of Engineering Research & Technology (IJERT), 12 (06). pp. 29-33. ISSN 2278-0181

Krcheva, Violeta and Cekerovska, Marija and Srebrenkoska, Sara (2023) Simulation of toolpaths and program verification of a CNC lathe machine tool. Machines. Technologies. Materials., 2 (2). pp. 139-142. ISSN 2535-0021

Srebrenkoska, Sara and Dukovski, Vladimir (2022) Defect formation in automated fiber placement technology. Tekstilna industrija, 70 (4). pp. 24-29. ISSN 0040-2389

Srebrenkoska, Sara (2022) COST Action CA21155 Advanced Composites under HIgh STRAin raTEs loading: a route to certification-by-analysis (HISTRATE). [Project] (In Press)

Srebrenkoska, Sara and Cekerovska, Marija (2022) Automated fiber placement technology overview. Contemporary Trends and Innovations in the Textile Industry. pp. 411-417. ISSN ISBN-978-86-900426-4-7

Srebrenkoska, Sara and Cekerovska, Marija (2022) Defect characteristics using automated fiber plasement. Contemporary Trends and Innovations in the Textile Industry. pp. 126-133. ISSN ISBN-978-86-900426-4-7

Srebrenkoska, Sara (2021) CA20101 - Plastics monitoRIng detectiOn RemedIaTion recoverY (PRIORITY). [Project] (In Press)

Srebrenkoska, Sara and Risteska, Svetlana (2021) Mechanical and morphological analyses of laminated plates. Contemporary trends and innovations in the textile industry. ISSN ISBN: 978-86-900426-3-0

Srebrenkoska, Sara (2021) Роботизирани процеси за автоматско полагање на композитни влакна/ленти (AFP/ATL) при производство на делови од композитни материјали. Doctoral thesis, Ss. Cyril and Methodius University in Skopje.

Srebrenkoska, Sara and Dukovski, Vladimir and Risteska, Svetlana (2020) Influence of the Process Parameters on Laser - Assisted Automated Tape Placement Process. International Journal of Engineering Research & Technology (IJERT), 9 (11). pp. 638-644. ISSN 2278-0181

Srebrenkoska, Sara and Dukovski, Vladimir and Risteska, Svetlana (2020) The designing of laser assisted automated tape laying process for obtaining of the thermoplastic composite parts. Contemporary trends and innovations in the textile industry CT&ITI 2020 Proceedings. pp. 339-346. ISSN ISBN 978-86-900426-2-3

Srebrenkoska, Sara (2019) Влијание на технолошките параметри на процесот кај роботизираните LATP (Laser Assisted Automated Tape Placement) технологии врз карактеристиките на композитот. In: Школа за докторски студии, УКИМ.

Srebrenkoska, Sara and Dukovski, Vladimir and Risteska, Svetlana (2019) Laser assisted automated tape laying process for production of composite laminates. Union of Engineers and Textile Technicians of Serbia, Belgrade, Serbia, May, 2019. pp. 107-112. ISSN ISBN 978-86-900426-1-6

Srebrenkoska, Sara (2019) CA18125 - Advanced Engineering and Research of aeroGels for Environment and Life Sciences (AERoGELS). [Project] (In Press)

Srebrenkoska, Sara (2019) Истражувања на технолошките параметри за автоматизиран ATL процес со примена на ласер. In: Годишна конференција за докторски студии, УКИМ, Скопје.

Srebrenkoska, Sara (2019) Overview of the research of laser assisted automate tape laying process for production of advanced composite materials for self-healing. In: PhD Students’ and Early Career Investigators’ Meeting – Self-healing concrete structures, March, 7th -8th 2019, University of Novi Sad, Faculty of Technology, Novi Sad, Serbia. (Unpublished)

Srebrenkoska, Sara and Zhezhova, Silvana and Risteski, Sanja and Cekerovska, Marija and Srebrenkoska, Vineta and Risteska, Svetlana (2018) Aplication of factorial experimental design in predicting properties of polymer composites. Balkan Journal of Applied Mathematics and Informatics, 1 (1). pp. 85-88. ISSN 2545-479X; 2545-4803 online

Srebrenkoska, Sara (2018) Basis of the composite materials and their production technologies. In: Erasmus conference, 14-18 May 2018, Bucharest, Romania. (Unpublished)

Srebrenkoska, Sara (2018) Роботизирани AFP/ATL процеси за производство на делови од композитни материјали. In: Докторски семинар и годишна конференција, УКИМ, Скопје. (Unpublished)

Mijajlovikj, Maja and Srebrenkoska, Sara and Cekerovska, Marija and Risteska, Svetlana and Srebrenkoska, Vineta (2018) Application of Taguchi method in production of samples predicting properties of polymer composites. Balkan Journal of Applied Mathematics and Informatics, 1 (1). pp. 79-84. ISSN 2545-479X/2545-4803 online

Cekerovska, Marija and Filkoski, Risto and Cekerovski, Todor and Srebrenkoska, Sara (2018) Numerical modeling of flat plate solar collectors with a CFD approach. (Balkan Journal of Applied Mathematics and Informatics BJAMI), 1 (2). pp. 45-51. ISSN 545-479X

Srebrenkoska, Sara (2016) Примена на шест сигма методологија и дизајн на експерименти за подобрување на индустриски процес за добивање на композитни цевки. Masters thesis, Ss. Cyril and Methodius University in Skopje.

Pop Metodieva, Biljana and Zhezhova, Silvana and Srebrenkoska, Vineta and Naseva, Simona and Srebrenkoska, Sara (2016) Design of polymer composite pipes produced by filament winding technology. Machines, Technologies, Materials, 10 (1). pp. 23-26. ISSN 1313-0226

Srebrenkoska, Vineta and Risteska, Svetlana and Mijajlovikj, Maja and Srebrenkoska, Sara and Zhezhova, Silvana (2016) Mechanical and thermal properties of filament wound composite pipes. In: VII International Metallurgy Congress, Metallurgy, Materials and Environmental, 09-12 June 2016, Ohrid, Macedonia. (Unpublished)

Srebrenkoska, Sara and Kocov, Atanas and Minovski, Robert (2016) Six sigma and design of experiments for improving the production of composite pipes. Journal for Technology of Plasticity, 41 (2). ISSN 0354-3870

Pop Metodieva, Biljana and Zhezhova, Silvana and Srebrenkoska, Vineta and Naseva, Simona and Srebrenkoska, Sara (2015) Design of polymer composite pipes produced by filament winding technology. In: XII International Congress Machines, Technologies, Materials 2015, 16-19 Sept 2015, Varna, Bulgaria.

Srebrenkoska, Vineta and Naseva, Simona and Risteska, Svetlana and Stefanoska, Maja and Srebrenkoska, Sara (2015) Effects of winding angles on mechanical properties of filament wound pipes. In: IV International Congress “Engineering, Environment and Materials in Processing Industry, 04-06 March 2015, Jahorina, Bosnia and Herzegovina.

Naseva, Simona and Srebrenkoska, Vineta and Risteska, Svetlana and Stefanoska, Maja and Srebrenkoska, Sara (2015) Mechanical properties of filament wound pipes: effects of winding angles. Quality of Life, 6 (1-2). pp. 10-15. ISSN 1986-602X

Pop Metodieva, Biljana and Srebrenkoska, Sara and Srebrenkoska, Vineta (2015) The design of glass fiber//epoxy composite pipes by the implementation of the full factorial experimental design. Quality of Life, 6 (3-4). pp. 83-87. ISSN 1986-602X (print); 1986-6038 (online)

Srebrenkoska, Vineta and Risteska, Svetlana and Srebrenkoska, Sara (2014) Production of filament wound composite tubes for construction. In: Present and Future of FRP in Construction, 23 Oct 2014, Technical University-Kaiserslautern, Germany. (Unpublished)