Items where Subject is "Materials engineering"

A

Abouserie, Ahed and El-Nagar, Gumaa A. and Heyne, Benjamin and Günter, Christina and Schilde, Uwe and Mayer, Matthew T. and Stojkovikj, Sasho and Roth, Christina and Taubert, Andreas (2020) Facile Synthesis of Hierarchical CuS and CuCo2S4 Structures from an Ionic Liquid Precursor for Electrocatalysis Applications. ACS Applied Materials & Interfaces, 12 (47). pp. 52560-52570. ISSN 1944-8252

Adjiski, Vancho (2014) Можности за симулирање на ефектот на реверсирање на чадот и пожарните продукти со помош на CFD софтвер во рудниците за подземна експлоатација. Natural resources and technologies, 8 (1). pp. 31-42. ISSN 185-6966

Adjiski, Vancho (2014) Modern computer method for planning and simulation of fire scenarios and emergency evacuation plans in underground mines. In: Технологија на подземна и површинска експлоатација на минерални суровини, 14 Nov 2014, Radovis, Macedonia.

Adjiski, Vancho (2012) Opportunities for application of software visualization for better understanding of the work activities and interpreting many types of data in mining engineering. In: Подекс-Повекс '12: Технологија на подземна и површинска експлоатација на минерални суровини, 23 Nov 2012, Stip, Macedonia.

Adjiski, Vancho (2014) Possibilities for simulating the smoke rollback effect in underground mines using CFD software. GeoScience Engineering, 60 (2). pp. 8-18. ISSN 1802-5420

Adjiski, Vancho (2015) Visualization and simulation of the plans for evacuation and rescue in case of fire in underground mines. In: Технологија на подземна и површинска експлоатација на минерални суровини, 13 Nov 2015, Krusevo, Macedonia.

Adjiski, Vancho and Despodov, Zoran and Mijalkovski, Stojance and Stojov, Vlatko (2016) Modeling of the plans for development of underground mining facilities. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Dec 2016, Strumica, Macedonia.

Adjiski, Vancho and Despodov, Zoran and Mirakovski, Dejan and Mijalkovski, Stojance (2016) Analysis for еfficiency of work in underground mine using a computer application. Natural Resources and Technologies, X (10). pp. 23-32. ISSN 185-6966

Adjiski, Vancho and Despodov, Zoran and Mirakovski, Dejan and Mijalkovski, Stojance (2015) Fire risk assessment and computer simulation of fire scenario in underground mines. Studies in Engineering and Technology, 2 (1). pp. 54-60. ISSN 2330-2038

Adjiski, Vancho and Mirakovski, Dejan and Despodov, Zoran and Mijalkovski, Stojance (2016) CFD simulation of the brattice barrier method for approaching underground mine fires. Mining Science, 23. pp. 161-172. ISSN 2300-9586

Adjiski, Vancho and Mirakovski, Dejan and Despodov, Zoran and Mijalkovski, Stojance (2015) Modeling of fire scenarios in underground mines. Natural Resources and Technologies, 9 (9). pp. 29-47. ISSN 185-6966

Adjiski, Vancho and Mirakovski, Dejan and Despodov, Zoran and Mijalkovski, Stojance (2015) Simulation and optimization of evacuation routes in case of fire in underground mines. Journal of Sustainable Mining, 14 (3). pp. 133-143. ISSN 2300-3960

Adjiski, Vancho and Serafimovski, Dalibor and Despodov, Zoran and Mijalkovski, Stojance (2017) System for installation and application of "QR code" in the mining industry. In: X Стручно советување со меѓународно учество Подекс – Повекс ’17, 03-05 Nov 2017, Ohrid, Macedonia.

Aleksandar, Cvetkovski (2019) CA18202 - Network for Equilibria and Chemical Thermodynamics Advanced Research. [Project] (In Press)

Alili, Agron and Krstev, Boris and Trajkova, Sofce and Stoilov, Zoran and Krstev, Aleksandar and Stamenov, Goran (2015) Disposed biomass as a new origin for heat power – possibilities and perspectives. Natural Resources and Technologies, 9 (9). pp. 233-244. ISSN 185-6966

Angusheva, Biljana and Jovanov, Vojo and Srebrenkoska, Vineta and Fidancevska, Emilija (2014) Glass Ceramics Composites Fabricated from Coal Fly Ash and Waste Glass. Proceedings of the 27th International Conference of the Israel Nuclear Societies. pp. 294-299.

Atanasova-Pacemska, Tatjana and Srebrenkoska, Vineta and Koceva Lazarova, Limonka (2018) First Winter MI-NET Modeling Week in Macedonia. [Project]

Avella, Maurizio and Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Gentile, Gennaro and Grozdanov, Anita and Errico, Maria and Buzarovska, Aleksandra (2006) Recycling and reuse facilities of lignocellulosic material filled eco-composites. Proceedings on 12th European Conference on Composite Materials.

B

Barvinok, Vitaly and Bogdanovich, Valery and Dokukina, Irina and Barvinok, Alexey and Bunova, Galina and Cingoski, Vlatko (2014) Mathematical Modeling of Spray Material Acceleration and Heating during the Formation of Plasma Cluster Coatings. Wulfenia Journal, 21 (2). pp. 94-103. ISSN 1561-882X

Barvinok, Vitaly and Bogdanovich, Valery and Dokukina, Irina and Barvinok, Alexey and Cingoski, Vlatko (2014) Mathematical Modeling of High Energy Plasma Technologies with Account for some of the Fundamental Problems. Wulfenia Journal, 21 (2). pp. 104-113. ISSN 1561-882X

Basovski, Gorgi and Dimeski, Dimko and Srebrenkoska, Vineta and Smileski, Rose (2004) Спојување на метали со помош на експлозија. In: XVIII конгрес на хемичарите и технолозите на Македонија, 23-25 Sept 2004, Охрид.

Basovski, Gorgi and Srebrenkoska, Vineta and Dimeski, Dimko and Dimitrievski, Zivko (2002) Смалување на убојното дејство на фрагментите на рачните бомби со помош на контролирана фрегментација. Proceedingf of First Simposyum of Explosive Materials, Weapons and Military Technology.

Blazevska Gilev, Jadranka and Lisickov, Kiril and Fidancevska, Emilija and Srebrenkoska, Vineta (2013) Creation of lifelong learning network for development of sustainable technologies. Proceedings 3rd International Congress “Engineering, Environment and Materials in Processing Industry”. pp. 480-486.

Boettcher, Tim and Stojkovikj, Sasho and Khadke, Prashant and Kunz, Ulrike and Mayer, Matthew T. and Roth, Christina and Ensinger, Wolfgang and Muench, Falk (2021) Electrodeposition of palladium-dotted nickel nanowire networks as a robust self-supported methanol electrooxidation catalyst. Journal of Materials Science, 56. pp. 12620-12633. ISSN 1573-4803

Boev, Blazo and Lepitkova, Sonja (1996) Selenium in sediments along the reaches of the river Zletovica and its tributares. In: Yugoslav Conference with International participants , 25-27 April, 1996, Beograd.

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Herakovic, Niko (2011) Effect of sonication applied during production of carbon fiber/epoxy resin composites evaluated by differential scanning calorimetry and thermo-gravimetric analysis. Macedonian Journal of Chemistry and Chemical Engineering, Vol. 30, No. 2, pp. 189–195 (2011).

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta (2013) Biocomposites based on PLA and kenaf fibers: Effect of fibrillated celulose. Macedonian Journal of Chemistry and Chemical Engineering, 32 (2). pp. 331-335. ISSN 1857-5552

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta (2013) Biocomposites based on poly(lactic acid) and kenaf fibers: effect of microfibrillated cellulose. Macedonian Journal of Chemistry and Chemical Engineering, 32 (2). pp. 331-335. ISSN 1857-5552 (online) 1857-5625

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta (2012) Poly(lactic acid) /kenaf fiber composites: effect of microfibrillated cellulose on interface-sensitive properties. Proceedings of the XXII International Congress of Chemists and Technologists of Macedonia.

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta and Manov, Zlatan and Grozdanov, Anita and Buzarovska, Aleksandra and Avella, Maurizio (2007) Sustainable composite materials based on renewable resources. In: IUMACRO-07 Macromolecules for a Sustainable, Safe and Healthy World, 10-13 June 2007, Polytechnic University - Brooklyn, New York, USA.

Bogoeva-Gaceva, Gordana and Herakovic, Niko and Dimeski, Dimko and Stefov, Viktor (2010) Ultrasound assisted process for enhanced interlaminar shear strength of carbon fiber/epoxy resin composites. Macedonian Journal of Chemistry and Chemical Engineering. Vol. 29, No. 2, pp. 149–155 (2010).

Bogoeva-Gaceva, Gordana and Herakovic, Niko and Nasov, Ilija and Dimeski, Dimko and Srebrenkoska, Vineta and Stefov, Viktor (2012) New Materials for Production of Advanced Pneumatic and Hydraulic Valves. Proceedings of the International Conference on Composite Interfaces.

Bogoeva-Gaceva, Gordana and Janevski, Aco and Dekanski, Aleksandar and Burevski, D (1995) The effect of surface treatment on the interfacial properties in carbon fibre/epoxy matrix composites. Journal of materials science, 30 (13). pp. 3453-3546.

Bräuer, Patrick and Muench, Falk and Stojkovikj, Sasho and Gupta, Siddharth and Mayer, Matthew T. and Ensinger, Wolfgang and Roth, Christina and El-Nagar, Gumaa A. (2022) Shape-Controlled Electroless Plating of Hetero-Nanostructures: AgCu- and AgNi-Decorated Ag Nanoplates on Carbon Fibers as Catalysts for the Oxygen Evolution Reaction. ACS Applied Nano Materials, 5 (8). pp. 10348-10357. ISSN 2574-0970

C

Capeska, Svetlana and Risteska, Svetlana and Samak, Samoil and Kostadinoska, Biljana (2017) Impact of the technological parameters for the production of UD prepreg. Knowledge - International Journal, Scientific Papers, 20 (5). ISSN 2545-4439

Cingoski, Vlatko and Yamashita, Hideo and Aoi, Tatsufumi (1994) Analysis of Eddy- Current Losses and Levitation Force inside Induction Furnace by 3-D Edge Finite Element Method. In: The Sixth Biennial IEEE Conference on Electromagnetic Field Computation, CEFC’94, July 5-7, 1994, Aix-les-Bains, France. (Unpublished)

Cingoski, Vlatko and Tanurkov, Dimitar and Papsterevski, Kosta (2014) Sustainable Energy Production from Old Coal-fired Thermal Power Plants beyond 2016 Utilizing Major Rehabilitation Program. In: International Environmental Law: Contemporary Concerns and Challenges in 2014. International Environmental Law (2). IUS Software d.o.o. GV Zalozba, Ljubljana, Slovenia, pp. 701-713. ISBN 978-961-247-280-1

Cvetkoska, Dijana and Dimovski, Igor and Samak, Samoil and Trompeska, Mirjana and Dukovski, Vladimir (2018) Using Constrained Multi-Optimization in Design of Composite for Filament Wound High Pressure Vessels. International Journal of Mathematics Trends and Technology ( IJMTT ), 61 (2). ISSN 2231 – 5373

Cvetkovski, Aleksandar (2022) 18202 Network for Equilibria and Chemical Thermodynamics Advanced Research. [Project] (Unpublished)

Cvetkovski, Aleksandar (2024) Analysis of the current tools for optimization of equilibrium constants from potentiometric data. Analytica Chimica Acta 1303 (2024) 342476, 1303.

Cvetkovski, Aleksandar (2021) Development of Vaccines: The role of designing formulation for delivering agents for immunization. In: Вакцините - глобален предизвик за побезбедно здравје, online работилница во организација на Студентски организирана медицинска асоцијација (СОМА), 12 May 2021, online.

Cvetkovski, Aleksandar (2021) The Role of The Hydrogen Bond in Molecular Crystals (Invited Lectures). In: ERASMUS Mobility Program Goce Delcev University (R.Macedonia) and Mugla University (Turkey), 17-21 May, 2021, Mugla University (Turkey).

Cvetkovski, Aleksandar and Drakalska, Elena (2023) Correlation of H-bonding distances and strengths in API solvates case study on nitrofurantoin and pyridoxine. In: 26th Congress of the Society of Chemists and Technologists of Macedonia (SCTM), 20-23 Sept 2023, Ohrid, R.Macedonia.

Cvetkovski, Aleksandar and Drakalska, Elena (2023) Influence of beta-cyclodextrin on the phase transition in carbamazepine polymorphs. Macedonian pharmaceutical bulletin, 69 (Suppl 1) 189 - 190 (2023). ISSN DOI: 10.33320/maced.pharm.bull.2023.69.03.093

Cvetkovski, Aleksandar and Drakalska, Elena (2023) Influence of beta-cyclodextrin on the phase transition in carbamazepine polymorphs. In: 14th Central European Symposium of Pharmceutical Technology (CESPT), 28-30 Sept 2023, Ohrid, R.Macedonia.

Cvetkovski, Aleksandar and Drakalska, Elena (2023) Influence of mechanochemical processing to phase transition of carbamazepine polymorphs and formation of Inclusion Complex with cyclodextrin. In: Mechanochemistry in Europe: Challenges, Outcomes, Syntheses, Targets, 22-23 June 2023, Cagliari, Italy.

Cvetkovski, Aleksandar and Drakalska, Elena and Duvlis, Sotirija and Angelovska, Bistra (2021) The role of Crystal Engineering in designing functional materials (perspective for Pharmaceutical cocrystals). In: International Scientific Conference on the “Actual problems of the natural science" dedicated to 98th anniversary of National leader heydar Aliyev, 06-07 May 2021.

Cvetkovski, Aleksandar and Makreski, Petre and Pejov, Ljupco and Stojanovska Pecova, Monika and Bertolasi, Valerio and Gilli, Paola and MacGullivray, Leonard (2023) Polymorphism in S(+)Clopidogrel-Picrate: Insights from X-ray Diffraction, Vibrational Spectroscopy, Thermal Analysis, and Quantum Chemistry. Crystals 2024, 14(1), 10, 14 (1(10)). ISSN 2073-4352

Cvetkovski, Aleksandar (2019) CA18112 - Mechanochemistry for Sustainable Industry. [Project] (Unpublished)

Cvetkovski, Aleksandar (2020) Increasing water solubility of drugs, prerequisite for improvement of bioavailability. Acta Medica Balkanica International Journal of Medical Science, 3 (5). pp. 9-12. ISSN 2545-4870

Cvetkovski, Aleksandar (2019) NECTAR - the Network for Equilibria and Chemical Thermodynamics Advanced Research, a European science network funded under COST Action CA18202. [Project]

Cvetkovski, Aleksandar and Angelovska, Bistra (2016) The role of cocrystallization screening for the assessment of structure-activity relationship in drug development. In: 6th Congress of Pharmacy of Macedonia, 1-6 June 2016, Ohrid, Macedonia.

Cvetkovski, Aleksandar and Angelovska, Bistra (2016) The role of cocrystallization screening for the assessment of structure-activity relationship in drug development. Macedonian pharmaceutical bulletin, 62. pp. 345-346. ISSN 1409 - 8695

Cvetkovski, Aleksandar and Bertolasi, Valerio and Gilli, Paola (2017) Pseudo-polymorphic forms of new molecular salts of the antiplated drug with thienopyridine structure S(+)Clopidogrel. In: Crystallization by Design, CF@BO2017, 4-6 June 2017, Bologna, Italy.

Cvetkovski, Aleksandar and Drakalska, Elena (2019) The role of proton transfer in multicomponent crystals of pyridine derivative with carboxylic acids. In: 10th Crystal Forms Conventions at Bologna, Italy, 09-11 June 2019, Bologna, Italy.

Cvetkovski, Aleksandar and Ferretti, Valeria (2016) Crystal Structure and Packing Analysis of Nitrofurantoin N,N-dimethylformamide Solvate. Crystallography Reports, 61 (4). pp. 611-615. ISSN 1063-7745 (Print)/1562-689X (Online)

Cvetkovski, Aleksandar and Gjorgieva Ackova, Darinka and Smilkov, Katarina (2019) Screening for nutraceutical - drug interactions toward the non-covalent interactions of their solid binary systems. In: The European Network on Understanding Gastrointestinal Absorption-related Processes (UNGAP) Annual Meeting, 12-13 Feb 2019, Sofia, Bulgaria.

Cvetkovski, Aleksandar and Gjorgieva Ackova, Darinka and Smilkov, Katarina and Makreski, Petre (2019) Screening for nutraceutical - drug interactions toward the non-covalent interactions of their solid binary systems (Case study on Piperine). In: UNGAP Spring Meeting, 12-13 Feb 2019, Sofia, Bulgaria.

D

Dambov, Ilija and Dambov, Risto (2023) Construction of the pipeline trench for MHEC. XIV Стручно советување со меѓународно учество: Технологија на подземна и површинска експлоатација на минерални суровини Подекс – Повекс ’23 (14).

Dambov, Risto (2013) Дупчење и минирање. Универзитет „Гоце Делчев“, Штип. ISBN 978-608-4708-62-9

Dambov, Risto (2015) Специјални минирања. 622.235-049.8(035) . Универзитет „Гоце Делчев”, Штип, Македонија. ISBN 978-608-244-220-4

Dambov, Risto and Brahimaj, Frasher and Ljatifi, Ejup and Dambov, Ilija (2018) Seismic impact from massive blastings on around objects. In: XI Expert conference themed: “Technology of underground and surface mining of mineral raw materials” Podeks - Poveks" 18 , 09-11 Nov 2018, Struga, Macedonia.

Dambov, Risto and Brandy, Fausto and Dambov, Ilija (2017) Expansive mortar to demolish and cut rocks and concretes. In: 7th Balkanmine Congress – Proceedings, 11-13 Oct 2017, Prijedor, BiH.

Dambov, Risto and Brandy, Fausto and Stojceski, Igor and Dambov, Ilija (2018) Use of non – explosive material for crashing and cutting. 26th International Conference Ecological Truth & Environmental Research, 12-15 June 2018, Bor Lake, Bor, Serbia.

Dambov, Risto and Dambov, Ilija and Delipetrov, Todor (2013) Analysis of the obtained statistical measurement values of seismical blasting tremors. Proceding of V Balkan Mining Congress, Balkanmine, 850.

Dambov, Risto and Karanakova Stefanovska, Radmila and Dambov, Ilija (2015) Significance and role of stemming of the blast hole. In: Podeks - Poveks 2015, 13-15 Nov 2015, Krusevo, Macedonia.

Dambov, Risto and Rzanikoski, Nikola and Stojceski, Igor and Dambov, Ilija (2017) Practical application of unexplosive mixtures for cutting and getting commercial marble blocks in quarry Sivec. In: 10-то стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс – Повекс '17, 03-05 Nov 2017, Ohrid, Macedonia.

Dambov, Risto and Rzanikoski, Nikola and Stojceski, Igor and Stanojoski, Hristijan (2018) Methods for obtaining dimension stones in quarries for architectone building stone. In: XI Expert conference themed: “Technology of underground and surface mining of mineral raw materials” Podeks - Poveks" 18 , 09-11 Nov 2018, Struga, Macedonia.

Dambov, Risto and Stojceski, Igor and Rzanikoski, Nikola and Dambov, Ilija and Stanojoski, Hristijan (2018) Aplication of nonexplosive expanding mixures (FRACT.AG) for breaking big blocks for large diameters. In: XI Expert conference themed: “Technology of underground and surface mining of mineral raw materials” Podeks - Poveks" 18 , 09-11 Nov 2018, Struga, Macedonia.

Dambov, Risto and Stojkoski, Goran and Hristov, Dimitar and Rzanikoski, Nikola (2013) Techno – economical analyses of the methods for producing of dimension stone blocks. V Balkan Mining Congres, Balkanmine. Ohrid, Macedonia.

Demboski, Goran and Srebrenkoska, Vineta and Zhezhova, Silvana and Kortoseva, Sonja (2016) Utilization of garment industry textile waste. In: GREDIT’2016 – Green Development Infrastucture Technology, 31 March - 02 Apr 2016, Skopje, Macedonia.

Demboski, Goran and Srebrenkoska, Vineta and Zhezhova, Silvana and Kortoseva, Sonja (2016) Utilization of garment industry textile waste. Mech. Eng. Sci. Journal, 34 (1). pp. 241-246. ISSN 1857 – 5293 (in print) 1857 – 9191(on line)

Despodov, Zoran and Mijalkovski, Stojance (2022) Примена на методите за откопување со заполнување на откопаните простори во подземните рудници за метали во Македонија. In: XIII Стручно советување од областа на подземната и површинската експлоатација, 14-16 Oct 2021, Ohrid.

Despodov, Zoran and Mijalkovski, Stojance and Despodov, Bojan (2023) Some technical solutions in Macedonian mining with a high degree of environmental protection. In: 9th International Conference Mining and Environmental protection, 24-27 May 2023, Sokobanja, Serbia.

Despodov, Zoran and Mirakovski, Dejan and Mijalkovski, Stojance and Gocevski, Borce (2021) Cut and fill Underground Mining Method with paste backfill – technology with high level of environmental protection. In: 8th International Conference - Mining And Environmental Protection, 22-25 Sept 2021, Sokobanja.

Despodov, Zoran and Cekerovski, Todor and Adjiski, Vancho (2013) Application of GPS technology for management with mobile mining machinery in copper mine "Bučim". Underground Mining Engineering, 23. pp. 69-76. ISSN 0354-2904

Despodov, Zoran and Cekerovski, Todor and Minov, Kirco (2015) Повеќекритериумска анализа за избор на оптимален вид на дампер за услови во рудникот „Бучим”. In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Despodov, Zoran and Mijalkovski, Stojance and Adjiski, Vancho and Kostov, Mitko (2017) Waste management plan generated from mining activities in the mine for production of lead and zinc "Toranica" - Kriva Palanka. In: 6th International Symposium Mining and environmental protection, 21-24 June 2017, Vrdnik, Serbia.

Despodov, Zoran and Mijalkovski, Stojance and Gocevski, Borce and Mitić, Saša (2016) Determination of the optimal length on the ore excavation block for the sublevel caving method. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Nov 2016, Strumica, Macedonia.

Dimeski, Dimko (2004) Kompozitni materijali za licna balisticka zastita-dizajn i performansi. In: Production and Industrial Engineering Association.

Dimeski, Dimko (1987) Ojačani plastični materijali za balističku zaštitu. In: Fiber Reinforced Composites, Novi Sad.

Dimeski, Dimko (2012) Poly(lactic acid) /kenaf fiber composites: effect of microfibrillated cellulose on interface-sensitive properties. In: XXII Congress of Chemists and Technologists of Macedonia.

Dimeski, Dimko (2006) Processing of PLA/RS and PLA/Kenaf pellets into composite panels. In: Eco-Houses Based on Eco-Friendly Polymer Composite Construction Materials - ECO-PCCM, FP6 Project ECO-PCCM 6th Meeting, Budapest.

Dimeski, Dimko (2006) Processing of PLA/RS and PLA/Kenaf pellets into composite panels. In: FP6 Project ECO-PCCM Sixth Meeting, Budapest.

Dimeski, Dimko (2007) Production and Characterization of Kenaf Fibers / PP Composites. In: ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005..

Dimeski, Dimko (2004) Sporedbeni karakteristiki na ednonasocnite i dvonasocnite kompoziti nameneti za balisticka zastita. In: XVIII kongres na hemicarite i tehnolozite na Makedonija.

Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta (2011) Ballistic properties of polyethylene composites based on bidirectional and unidirectional fibers. Conference Proceedings. ISSN 0352-6542

Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta (2011) Resin content and molding pressure influence on ballistic properties and trauma effect of aromatic amide fibers composites. Conference Proceedings. ISSN 0352-6542

Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta (2013) The implementation of full factorial experimental design in predicting the ballistic strength of glass fiber/phenolic composites. In: X Simpozijum Savremene tehnologije i privredni razvoj, 22-23 Oct 2013, Leskovac, Srbija.

Dimeski, Dimko and Spaseska, Dijana (2004) Ballistic properties of bidirectional fiber/resin composites. Bulletin of the Chemists and Technologists of Macedonia. ISSN 0350 – 0136

Dimeski, Dimko and Spaseska, Dijana and Srebrenkoska, Vineta (2009) Ballistic strength of woven fabrics for personal protection. Journal of Engineering & Processing Management, 1 (2). pp. 31-44.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Дизајн и анализа на експерименти. Универзитет „Гоце Делчев” - Штип . ISBN 978-608-244-057-6

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Механички својства на текстилни материјали. Универзитет „Гоце Делчев” - Штип. ISBN 978-608-244-105-4

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Advanced prepreg ballistic composites for military helmets. In: 6th International Scientific Conference on Defensive Technologies - OTEH 2014, 09-10 Oct 2014, Belgrade, Republic of Serbia.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Design of glass/phenolic ballistic composites by implementation of factorial experimental design. Zaštita materijala, 55 (4). pp. 122-126.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Predicting ballistic strength of life-saving aramid fiber composites for personal protection. Quality of Life, 5 (1-2). pp. 33-38. ISSN 1986-602X

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Predicting the ballistic strength of aramid fiber composites by implementing full factorial experimental design. Technologica Acta, 7 (2). pp. 33-37. ISSN 1840-0426/ 2232-7568 (Online)

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Predicting the ballistic strength of ultra high molecular weight polyethylene/fiber composites by implementing full factorialexperimental design. Journal of Engineering & Processing Management, 6 (1). pp. 91-98.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) A comparison of penetration mechanics of metal and fiber/resin composite targets against ballistic impact. In: VIth International Metallurgical Congress, 29 May-01June 2014, Ohrid, Macedonia.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) The design of nylon fiber/phenolic ballistic composites by the implementation of the full factorial experimental design. Advanced technologies, 3 (1). pp. 54-58. ISSN 2217-9720

Dimeski, Dimko and Srebrenkoska, Vineta (2013) The optimization of fiber-reinforced backpanel as a substrate for ceramic/composite ballistic inserts for personal protection. In: X Simpozijum Savremene tehnologije i privredni razvoj, 22-23 Oct 2013, Leskovac, Srbija.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) The role of contemporary ferrous and nonferrous materials in ballistic protection of military vehicles. In: VIth International Metallurgical Congress, 29 May-01June 2014, Ohrid, Macedonia.

Dimeski, Dimko and Srebrenkoska, Vineta and Basovski, Gorgi (2002) Analyze with fast thermal neutrons for explosives detections. Proceedings of the First Simposyum of Explosive Materials, Weapons and Military Technology.

Dimeski, Dimko and Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Manov, Zlatan and Grozdanov, Anita and Avella, Maurizio and Zucchini, Valerio (2006) Kenaf fiber/Polypropylene composites as potentional material for partitioning panels in buildings. In: 12th European Conference on Composite Materials, 29 Aug-1 Sept 2006, Biarritz.

Dimeski, Dimko and Srebrenkoska, Vineta and Mirceska, Natasa (2015) Ballistic Impact Resistance Mechanism of Woven Fabrics and their Composites. International Journal of Engineering Research & Technology (IJERT), 4 (12). pp. 107-112. ISSN 2278-0181

Dimeski, Dimko and Srebrenkoska, Vineta and Spaseska, Dijana and Samakoski, Blagoja (1999) Polietilenski filc i tkaenina za balisticka zastita. Proceedings of the XVI Congress SHTM.

Dimitrijeva, Vanga and Golomeova, Saska and Jordeva, Sonja and Zhezhova, Silvana and Efremov, Jordan (2022) Кирилицата, магичниот мост на уметноста. [Show/Exhibition]

Dimitrijeva-Kuzmanoska, Vanga (2023) Идејно решение за изработка на службена униформа за пошторазнесувачи-зимска. АД Пошта на Северна Македонија. (Unpublished)

Dimova, Tanja and Zhezhova, Silvana and Srebrenkoska, Vineta and Risteski, Sanja and Risteska, Svetlana (2019) Hand lay-up vs machine impregnation of the textile structures. Contemporary trends and innovations in the textile industry. pp. 378-384. ISSN 978-86-900426-1-6

Dimovski, Igor and Gjumandeloski, Ice and Kochoski, Filip and Paipuri, Mahendra (2018) Computer aided (filament winding) tape placement for elbows. Practically orientated algorithm. Balkan Journal of Applied Mathematics and Informatics (BJAMI), 1 (1). pp. 89-104. ISSN 2545-4803

Dimovski, Igor and Samak, Samoil and Trompeska, Mirjana and Hristoski, Martin and Dukovski, Vladimir (2017) Influence Of Each Of The Geometric Errors On The Total Displacement Error Of The Machine. In: IEEE EUROCON 2017, 17th International Conference on Smart Technologies .

Dimovski, Igor and Trompeska, Mirjana and Samak, Samoil and Dukovski, Vladimir and Cvetkoska, Dijana (2018) Algorithmic approach to geometric solution of generalized Paden–Kahan subproblem and its extension. International Journal of Advanced Robotic Systems (IJARS), 15 (1).

Dimzoski, Bojan and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta and Avella, Maurizio and Gentile, Gennaro and Errico, Maria (2008) Preparation and characterization of poly(lactic acid)/rice hulls based biodegradable composites. Journal of Polymer Engineering, 28 (6-7). pp. 369-383.

Doneva, Nikolinka and Despodov, Zoran and Ivanovski, Dejan and Hadzi-Nikolova, Marija and Mijalkovski, Stojance (2017) Analysis of the results from the construction of the drift in schist with application of two technologies in mine “Sasa”. In: X Стручно советување со меѓународно учество Подекс – Повекс ’17, 03-05 Nov 2017, Ohrid, Macedonia.

Doneva, Nikolinka and Despodov, Zoran and Mirakovski, Dejan and Hadzi-Nikolova, Marija and Mijalkovski, Stojance (2015) Blasting in underground mining. In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Doneva, Nikolinka and Hadzi-Nikolova, Marija and Mijalkovski, Stojance and Adjiski, Vancho (2018) Methods for in-situ stress measurements in rock mass. In: XI expert conference with international participation in the area of underground and surface exploitation of mineral resources, "Podeks-Poveks 2018", 09-11 Nov 2018, Struga, Macedonia.

E

El-Nagar, Gumaa A. and Haun, Flora and Gupta, Siddharth and Stojkovikj, Sasho and Mayer, Matthew T. (2023) Causes and Effects of Unintended Cation Crossover in CO2 Reduction Cells. In: 244th ECS Meeting, 8 - 12 Oct 2023, Gothenburg, Sweden.

El-Nagar, Gumaa A. and Haun, Flora and Gupta, Siddharth and Stojkovikj, Sasho and Mayer, Matthew T. (2022) Impacts of Unintended Cation Crossover through Anion Exchange Membranes on the Operation of Zero-gap Cu-based CO2 Electrolysers. In: 2nd Symposium on Insights into Gas Diffusion Electrodes: From Fundamentals to Industrial Applications, 5-7 Sept 2022, Magdeburg, Germany.

El-Nagar, Gumaa A. and Haun, Flora and Gupta, Siddharth and Stojkovikj, Sasho and Mayer, Matthew T. (2023) Unintended Cation Crossover in CO2 Conversion MEA Cells: Causes and Effects. In: 244th ECS Meeting, 8 - 12 Oct 2023, Gothenburg, Sweden.

El-Nagar, Gumaa A. and Yang, Fan and Stojkovikj, Sasho and Mebs, Stefan and Gupta, Siddharth and Ahmet, Ibbi Y. and Dau, Holger and Mayer, Matthew T. (2022) Comparative Spectroscopic Study Revealing Why the CO2 Electroreduction Selectivity Switches from CO to HCOO– at Cu–Sn- and Cu–In-Based Catalysts. ACS Catalysis, 12 (24). pp. 15576-15589. ISSN 2155-5435

F

Fidancevska, Emilija and Bossert, Jorg and Angusheva, Biljana and Jovanov, Vojo and Srebrenkoska, Vineta (2016) Sintering of ceramics based on mechanicaly activated fly ash. Proceedings of the International RILEM Conference on Materials, Systems and Structures in Civil Engineering 2016. pp. 403-414. ISSN 978-2-35158-178-0

Fidancevska, Emilija and Hoeflinger, Willy and Grujic, Radoslav and Srebrenkoska, Vineta and Blazevska Gilev, Jadranka (2011) Sustainable development in materials engineering. Proceedings of the International Scientific Conference Renewable Energy Sources and Sustainable Development. ISSN 978-99955-49-72-5

Fidancevska, Emilija and Jovanov, Vojo and Angusheva, Biljana and Srebrenkoska, Vineta (2014) Composites based on fly ash and clay. Proceedings of the 27th International Conference of the Israel Nuclear Societies. pp. 292-294.

Fidancevska, Emilija and Srebrenkoska, Vineta (2012) Creation of university-enterprise cooperation networks for education on sustainable technologies. Maced. J. Chem. Chem. Eng., 31 (2). pp. 307-316. ISSN 1857-5552

Fidancevska, Emilija and Srebrenkoska, Vineta (2013) Creation of university-enterprise cooperation networks for education on sustainable technologies. Society of Chemists and Technologists of Macedonia.

Fidancevska, Emilija and Srebrenkoska, Vineta (2013) Materials Engineering. Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, CIP - Каталогизација во публикација Национална и универзитетска библиотека „Св. Климент Охридски", Скопје; CIP - Katalogizacija u publikaciji Biblioteka Matice srpske, Novi Sad. ISBN 978-608-4708-30-8

Frasher, Brahimaj and Dambov, Risto and Brahimaj, Shkurte (2021) The Determination of Optimal Parameters of the Geometry of Contour and Production Drillings. Journal of Int. Environmental Application & Science, Vol. 16(1): 16-24 (2021) Research Paper (16/1).

Frasher, Brahimaj and Dambov, Risto (2018) Fly rocks in surface mine during the blasting. In: XI Expert conference themed: “Technology of underground and surface mining of mineral raw materials” Podeks - Poveks" 18 , 09-11 Nov 2018, Struga, Macedonia.

G

Gicev, Vlado and Golubovski, Roman and Popovski, Risto and Cernik - Anastasovska, Dragana and Risteska, Aleksandra and Zlatev, Zoran and Kokalanov, Vasko (2015) Распределба на сеизмичка енергија при интеракција објект-темел-почва. [Project] (Submitted)

Gocevski, Borce and Ivanovski, Dejan and Dimitrovska, Ana and Mitevski, Toni and Velinovski, Jovica and Ristovski, Cedo and Mijalkovski, Stojance (2023) Новите техничко – технолошки достигнувања во рудникот за олово и цинк Саса – М. Каменица. In: XIV Стручно советување со меѓународно учество од областа на подземната и површинската експлоатација на минералните суровини, Подекс - Повекс 2023, 6-8 Oct 2023, Ohrid.

Gocevski, Borce and Ivanovski, Dejan and Filippov, Sergej and Ristovski, Cedo and Mijalkovski, Stojance (2018) Application of contemporary instruments and information systems in the underground mine “Sasa” of lead and zinc ore. In: XI expert conference with international participation in the area od underground and surface exploitation of mineral resources, "Podeks-Poveks 2018", 09-11 Nov 2018, Struga, Macedonia.

Gocevski, Borce and Ivanovski, Dejan and Filippov, Sergej and Ristovski, Cedo and Mijalkovski, Stojance (2018) Application of contemporary machines and technologies in the underground mine “Sasa” of lead and zinc ore. In: XI expert conference with international participation in the area of underground and surface exploitation of mineral resources, "Podeks-Poveks 2018", 09-11 Nov 2018, Struga, Macedonia.

Golomeov, Blagoj and Golomeova, Mirjana and Zendelska, Afrodita and Mijalkovski, Stojance (2022) Идејно решение за хидротранспорт и одлагање на јаловината на јаловиште 2 – Тораница. In: XIII стручно советување од областа на подземната и површинската експлоатација (ПОДЕКС-ПОВЕКС 2022), 14-16 Oct 2021, Ohrid.

Golomeov, Blagoj (2012) Анекс на проектот за оскултација на хидројаловиште број 3 фаза 2 на рудник „Саса“ - Мак.Каменица. [Project] (Unpublished)

Golomeov, Blagoj and Golomeova, Mirjana and Zendelska, Afrodita (2017) The use of geosynthetic materials in the design of tailings for the increased protection of the wider environment. In: 4th Congress on Dams, 28-30 Sept 2017, Struga, Macedonia.

Golomeov, Blagoj and Kostadinov, Ljubisa (2018) The use of geosynthetic materials in the design of tailing dam. LAP Lambert Academic Publishing . ISBN 978-613-8-39046-6

Golomeova, Saska and Jordeva, Sonja and Risteski, Sanja and Zhezhova, Silvana and Bojadziska, Slavica and Kertakova, Marija (2022) New standards to implement the 17 Sustainable Development Goals. In: Innovative and practice- oriented qualification in the field Sustainable production - Weis Consulting Assoc..

Golomeova, Saska and Jordeva, Sonja and Zhezhova, Silvana (2022) 4 Р (Редуцирај, Рециклирај, Реупотреби и Пренамени). [Project]

Golomeova, Saska and Jordeva, Sonja and Zhezhova, Silvana and Dimitrijeva, Vanga and Andronikov, Darko (2023) Water absorption and dimensional stability of shoe insoles. Leather & Footwear, 72 (1/23). pp. 3-6. ISSN 1849-9769

Golomeova, Saska and Mitreva, Elizabeta (2023) Менаџмент на конфекциско претпријатие- практикум. .

Golomeova, Saska and Popova, Dushica and Zhezhova, Silvana and Jordeva, Sonja and Dimitrijeva-Kuzmanoska, Vanga and Risteski, Sanja and Andronikov, Darko (2024) Effectiveness of teamwork in the textile-leather industry in the Republic of North Macedonia. The Journal Leather and Footwear, 73 (2/24). pp. 11-17. ISSN 1849-9767

Golomeova, Saska and Risteski, Sanja and Jordeva, Sonja and Zhezhova, Silvana and Bojadziska, Slavica (2022) Sustainability and CSR - Basic Knowledge. In: Workshop sustainable fashion - Weis consulting.

Golomeova, Saska and Zhezhova, Silvana and Jordeva, Sonja and Maksimov, Stefan and Andronikov, Darko and Mojsov, Kiro (2021) Effect of the pandemic on the clothing industry in the easthern region of R. N. Macedonia. In: Contemporary trends and innovations in textile industry, Belgrade, Serbia.

Golomeova, Mirjana and Golomeov, Blagoj (2012) Методи на испитувања во минералната технологија. Универзитет ”Гоце Делчев” – Штип, Штип. ISBN 978-608-4504-80-1

Golomeova, Mirjana and Zendelska, Afrodita (2016) Application of Some Natural Porous Raw Materials for Removal of Lead and Zinc from Aqueous Solutions. In: Microporous and Mesoporous Materials. InTech, pp. 21-49. ISBN 978-953-51-2583-9, Print ISBN 978-953-51-2582-2

Golomeova, Mirjana and Zendelska, Afrodita and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj (2014) Removal of Heavy Metals from Aqueous Solution using Clinoptilolite and Stilbite. International Journal of Engineering Research & Technology, 3 (11). pp. 1029-1035. ISSN 2278-0181

Golomeova, Mirjana and Zendelska, Afrodita and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj (2015) Removal of heavy metals from mine wastewater using zeolite bearing tuff. In: VIII Стучно советување со меѓународно учество Подекс-Повекс 2015, 13-15 Nov 2015, Krusevo, Macedonia.

Golomeova, Sanja and Srebrenkoska, Vineta and Golomeova, Saska and Zhezhova, Silvana (2013) Термохемиски процеси за енегретско искористување на отпад. In: Енергетска ефикасност и одржлив развој, 16-18 May 2013, Скопје.

Golomeova, Saska (2019) Придонес кон подобрување на својствата на шевот во производство на облека. PhD thesis, Универзитет „Св. Кирил и Методиј“.

Golomeova, Saska and Demboski, Goran (2016) Application of thermoplastic stitched reinforced tape for seam quality improving. In: 24th Congress of the society of chemists and technologists of Macedonia with international participation, 11-14 Sept 2016, Ohrid, Macedonia.

Golomeova, Saska and Demboski, Goran (2018) Garment quality increasing by seam properties improving. Knowledge - International Journal, Scientific and Applicative Papers, 22 (4). pp. 963-1124. ISSN 1857-923X

Golomeova, Saska and Demboski, Goran (2017) Investigation of seam performance using two different methods. 12 Symposium Novel Technologies and Economic Development.

Golomeova, Saska and Demboski, Goran (2017) Investigation of seam performance using two different methods. In: 12 Symposium Novel technologies and economic development, 20-21 Oct 2017, Leskovac, Serbia.

Golomeova, Saska and Demboski, Goran (2017) Performance of garment seams strengthened with thermoplastic stitched reinforced tape. Machines, Technologies, Materials, 11. ISSN 1313-0226

Golomeova, Saska and Demboski, Goran (2017) The influence of thermoplastic reinforcement tape location on seam performance. Advanced technologies, 6 (1). pp. 93-95. ISSN 2217-9720

Golomeova, Saska and Demboski, Goran and Jordeva, Sonja and Andronikov, Darko and Mojsov, Kiro and Janevski, Aco (2018) Selection of a supplier of thermoplastic interlining by numerical evaluation matrix. Mechanical Engineering – Scientific Journal, 36 (1). pp. 63-71. ISSN 1857–5293

Golomeova, Saska and Demboski, Goran and Kortosheva, Sonja (2011) Maximizing fusible interlinings bonding strength by optimizing the fusing conditions. Textile Science and Economy. ISSN 978-86-7672-150-4

Golomeova, Saska and Srebrenkoska, Vineta and Zhezhova, Silvana (2013) Третирање на цврст текстилен и комунален органски отпад. Natural Resources and Technology. ISSN 185-6966

Golomeova, Saska and Zhezhova, Silvana (2011) Управување со цврст текстилен отпад. pp. 167-174.

Grozdanov, Anita and Paunović, Perica and Vasilevska-Nikodinovska, Violeta and Dimitrov, Aleksandar and Yukhymchuk, Volodymyr and Stojkovski, Igor and Arsova-Sarafinovska, Zorica (2019) Structural analysis of x-ray irradiated carbon nanostructures. Material Science & Engineering International Journal, 3 (4). pp. 141-145. ISSN 2574-9927

I

Ivanovski, Dejan and Gocevski, Borce and Mijalkovski, Stojance and Ristovski, Cedo and Mitevski, Toni and Stojcev, Cece and Cvetkovski, Sasko (2022) Започнување со изработка на главен транспортен и сервисен нископ од површината до хоризонт 750 во рудникот за олово и цинк „Саса”. In: XIII Стручно советување од областа на подземната и површинската експлоатација (Подекс-Повекс 2022), 14-16 Oct 2021, Ohrid.

Ivanovski, Dejan and Mijalkovski, Stojance and Gocevski, Borce and Ristovski, Cedo (2015) Contribution of "Dzino plast" clay plug in optimization of drilling and blasting in mine for lead and zinc "Sasa". In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Ivanovski, Dejan and Mijalkovski, Stojance and Gocevski, Borce and Stoilovski, Stojne (2019) Примена на телескопски лафет во рудникот за олово и цинк „Саса”. In: XII Стручно советување од областа на подземната и површинската експлоатација (Подекс-Повекс 2019), 01-03 Nov 2019, Strumica, Macedonia.

J

Jakupi, Shaban and Lisickov, Kiril and Golomeova, Mirjana and Atkovska, Katerina and Marinkovski, Mirko (2016) Separation of Co(II) ions from water resources by natural zeolite (clinoptilolite). Zaštita materijala i životne sredine, 5 (1). pp. 57-66. ISSN 1800-9573

Janevski, Aco and Najdoski, Metodija and Stojkovikj, Sasho and Bogoeva-Gaceva, Gordana and Stefov, Viktor (2024) Morphological Peculiarities of Isotactic Polypropylene Nucleated with Alkaline Earth Metal Pimelates. In: 27th Congress of the Society of Chemists and Technologists of Macedonia (SCTM), 25-28 Sep 2024, Ohrid.

Janevski, Aco (2014) Основи на наука за материјалите 1 - скрипта. ISBN 978-608-4708-99-5.

Janevski, Aco and Blažev, Krsto and Andronikov, Darko and Mojsov, Kiro and Jordeva, Sonja and Kertakova, Marija and Zendelska, Afrodita (2018) Several ash features obtained from rice husk. In: 25th Congress of SCTM, 19-22 Sept 2018, Ohrid, R. Macedonia.

Janevski, Aco and Blažev, Krsto and Mojsov, Kiro and Andronikov, Darko (2017) Production of silica from rice husk. Природни ресурси и технологии, 11 (11). pp. 121-125. ISSN 185-6966

Janevski, Aco and Bogoeva-Gaceva, Gordana (2013) Crystalization of β-nucleated iPP in model composites with glass fibres. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Janevski, Aco and Bogoeva-Gaceva, Gordana (2014) Determination of the parameters of crystallization of maleic anhydride modified polypropylene in model composites with glass fibres. International Journal of Innovative Research in Science & Engineering (IJIRSE), 2 (10). pp. 705-713. ISSN 2347-3207

Janevski, Aco and Bogoeva-Gaceva, Gordana (1998) Isothermal crystallization of iPP in model glass‐fiber composites. Journal of Applied Polymer Science, 69 (2). pp. 381-389.

Janevski, Aco and Bogoeva-Gaceva, Gordana (2013) Kinetical and thermodynamical parametars of crystallization of iPP nucleated with mixed α-nucleators. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Janevski, Aco and Bogoeva-Gaceva, Gordana (2015) The influence of glass fibers on the morphology of β-nucleated isotactic polypropylene evaluated by differential scanning calorimetry. Journal of the Serbian Chemical Society, 80 (2). pp. 223-235. ISSN 0352-5139 (Print) 1820-7421 (Online)

Janevski, Aco and Bogoeva-Gaceva, Gordana and Grozdanov, Anita (1998) Crystallization and melting behavior of iPP studied by DSC. Journal of Applied Polymer Science, 67. pp. 395-404.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Mader, Edit (2000) Characterization of a maleic anhydride-modified polypropylene as an adhesion promoter for glass fiber composites. Journal of Adhesion Science and Technology, 14 (3). pp. 363-380.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Mader, Edit (1999) DSC analysis of crystallization and melting behavior of polypropylene in model composites with glass and poly(ethylene terephthalate) fibers. Journal of Applied Polymer Science, 74. pp. 239-246.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Najdoski, Metodija and Stefov, Viktor (2018) Isothermal Crystallization of Isotactic Polypropylene Nucleated with Pimelates of Earth-Alkaline Elements. In: 25th Congress of SCTM, 19-22 Sept 2018, Ohrid, R. Macedonia.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Stefov, Viktor and Najdoski, Metodija (2015) The correlation between structure and β-nucleation efficiency of Ba, Sr, Ca and Mg pimelates in isotactic polypropylene. Macedonian Journal of Chemistry and Chemical Engineering, 34 (1). pp. 189-199. ISSN 1857-5552

Janevski, Aco and Leben, Stanko and Osredkar, Uci and Sebenik, Anton (1992) Polymerization of diiodoacetylenes, their structure and electrical properties. Synthetic metals, 53 (1). pp. 21-28.

Janevski, Aco and Leben, Stanko and Sebenik, Anton and Osredkar, Uci (1991) The correlation between electrical properties and structure of substituted polyacetylenes. Polymer bulletin, 26 (4). pp. 473-480.

Jordeva, Sonja (2022) Текстилно-кожарски материјали. Министерство за образование и наука.

Jordeva, Sonja and Zhezhova, Silvana (2022) Механичка текстилна технологија 1. Универзитет „Гоце Делчев“, Штип. ISBN 978-608-244-935-7

Jordeva, Sonja and Zhezhova, Silvana and Golomeova, Saska (2023) Influence of the raw-material composition and the characteristics of the knitted fabrics on the properties of the socks. Knowledge, 56 (4). pp. 417-423. ISSN 2545-4439

Jordeva, Sonja (2010) Термофизиолошки комфор на плетенини за спортска облека во функција од структурните карактеристики и суровинскиот состав. Masters thesis, Универзитет „Св. Кирил и Методиј" -Скопје.

Jordeva, Sonja and Cortoseva, Sonja (2013) The influence of the raw material content and structural characteristics of interlock double layered knitted fabrics on the physico-mechanical properties. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Jordeva, Sonja and Golomeova, Saska (2019) Water vapour permeability as a factor of the thermophysiological comfort of knitted fabrics. Knowledge - International Journal, Scientific Papers, 30 (3). pp. 677-682. ISSN 2545-4439

Jordeva, Sonja and Golomeova, Saska and Kertakova, Marija and Mojsov, Kiro and Efremov, Jordan (2019) Тextile as a sustainable insulating material for buildings. Tekstilna industrija, 67 (2). pp. 20-28. ISSN 0040-2389

Jordeva, Sonja and Kertakova, Marija and Zhezhova, Silvana and Golomeova, Saska and Mojsov, Kiro (2020) Dyeing of textiles with natural dyes. Tekstilna industrija. ISSN 0040-2389

Jordeva, Sonja and Kjortoseva, Sonja and Kaloyanov, Nikola (2012) Research of thermo-physiological comfort of single jersey knitted structures with method of thermo-vision analysis. 4th International Scientific – Professional Conference Textile Science and Economy Proceedings, Zrenjanin.

Jordeva, Sonja and Kjortoseva, Sonja and Ljapceva, Kostadinka and Kaloyanov, Nikola (2010) The influence of structural properties and characteristics of the fiber on the physical-mechanical properties and thermo-physiological comfort of single jersey knitted fabrics. XX! Congress of Chemists and Technologists of Macedonia.

Jordeva, Sonja and Kortoseva, Sonja and Ljapceva, Kostadinka (2009) The influence of cotton knitted structure on the thermal comfort properties. VIII Congress of Pure and Applied Chemistry for Students of Macedonia.

Jordeva, Sonja and Kortoseva, Sonja and Mojsov, Kiro and Zhezhova, Silvana and Risteski, Sanja and Dimitrijeva, Vanga (2017) The influence of the structural characteristics of cotton and pоlyester knitted fabrics on the thermo-physiological comfort. Advanced technologies, 6 (1). pp. 1-93. ISSN 2406-3037

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Popeski-Dimovski, Riste and Zafirova, Koleta (2015) Sound insulation properties of structure designed from apparel cutting waste. In: 15th AUTEX World Textile Conference 2015, 10-12 June 2015, Bucharest, Romania.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2014) Application of Apparel Cutting Waste as Insulation Material. Book of Proceedings 6th International Textile Conference.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2016) Fire resistance of insulation structure from polyester cutting waste. In: 7-th International Conference of Textile, 10-11 Nov 2016, Tirana, Albania.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2014) Tekstilni otpad kao materijal za toplinsku izolaciju. Tekstil, 63 (5-6). pp. 168-178. ISSN 0492-5882

Jordeva, Sonja and Trajković, Dušan and Tomovska, Elena and Zafirova, Koleta (2014) Tekstilna industrija i tekstilni otpad u R. Makedoniji. Tekstilna industrija, 61 (6). pp. 29-32. ISSN 0040-2389

K

Karanakova Stefanovska, Radmila and Panov, Zoran and Dambov, Risto and Popovski, Risto (2017) Techno-economic and ecological advantages of unconventional methods for coal exploitation. In: 10-то стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс – Повекс '17, 03-05 Nov 2017, Ohrid, Macedonia.

Karolczak, Pawel and Kowalski, Maciej and Szmara, Adam and Trajchevski, Neven (2010) Application aiding rapid selection of cutting parameters on the example of aluminium alloys turning. Technological Engineering - International Scientific Journal, 7 (2). pp. 15-17. ISSN 1336-5967

Kertakova, Marija (2023) Рекламни флаери и постери за уписи на Технолошко-технички факултет во учебната 2023/2024. [Image]

Kertakova, Marija (2024) Sustainable Design and Its Importance in Contemporary Fashion – an Analysis of The Work of Fashion Designer Stella McCartney. In: 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry – CT&ITI 2024, 19-20 Sept 2024, Belgrade.

Kertakova, Marija and Efremov, Jordan and Kocaleva, Mirjana (2023) New ways of fashion presentation in the digital age period. Tekstilna industrija, 71 (1). pp. 44-50. ISSN 0040-2389

Kertakova, Marija and Golomeova, Saska and Andronikov, Darko (2024) Брошура на Технолошко-технички факултет за академската 2024/2025 година. [Image]

Kertakova, Marija (2018) Analysing the work of one of the most eminent modelers who worked during the First half of the XXth century – Jacques Dusse, Paul Poiret, Madeleine Vionnet, Mariano Fortuny y Madrazo and Jeanne Paquin. Tekstilna industrija. ISSN 0040-2389

Kochoski, Filip (2024) Развој на математички модели за дизајн на симетрични и асиметрични композитни делови. Doctoral thesis, University "Goce Delcev" - Stip.

Koleva, Violeta and Stojkovikj, Sasho and Najdoski, Metodija (2014) Electrochromism in Layered Vanadium-Based Thin Films. In: 16th International Workshop on Nanoscience and Nanotechnology NANO 2014, 7-8 Nov 2014, Sofia, Bulgaria.

Kostadinoska, Biljana (2021) Различни методи на импрегнација и полимеризација на смолен систем за производство на термореактивен ткаен препрег. Doctoral thesis, Универзитет Гоце Делчев /Институтот за современи композити и роботика/.

Kostadinoska, Biljana and Risteska, Svetlana and Samakoski, Blagoja (2021) Influence of the Process Parameters on Manufactured Prepregs by Solvent Impregnation. International Journal of Engineering Research & Technology (IJERT), 10 (01). ISSN 2278-0181

Kostadinoska, Biljana and Risteska, Svetlana and Samakoski, Blagoja and Capeska, Svetlana (2017) The compare of mechanical properties of composites at AFP technology with two technologies for curing. Knowledge - International Journal, 20 (5). pp. 2471-2479. ISSN 2545-4439

Kostadinoska, Biljana and Risteska, Svetlana and Stefanoska, Maja and Samakoski, Blagoja and Maneski, Gari (2015) Theoretical and Experimental Bending Properties of Composite Pipes. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9 (6).

Kostadinoska, Biljana and Risteska, Svetlana and Samakoski, Blagoja and Samak, Samoil and Romevski, Nikolce (2019) Influence of process parameters in production of resin film on kevlar fabric prepreg. In: ICAT'19 8th International Conference on Advanced Technologies.

Krstev, Boris (2016) Извештај од Ревизија на Основен проект за Казан Дол - Валандово. [Experiment] (Unpublished)

Krstev, Boris (2016) Извештај од Ревизија на Дополнителен проект за Казан Дол - Валандово. [Experiment] (Unpublished)

Krstev, Boris and Krstev, Aleksandar (2003) Processing of halcopyrite low grade ore - enhancing gold recovery by leaching and bioleaching. In: Internacional conference "New Trends in Mineral processing V", 26-28.06.2003, Ostrava, Czech Republic.

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2008) Automation of experimental investigation of physical phenomena in the cutting process by machining with turning. In: XXXII Conference on production engineering SPMS 2008, 18-20 Sept 2008, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 29-32. ISSN 1821-4932

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr and Tomov, Mite (2006) Monitoring system for investigation of the cutting forces in the machining with turning. In: Proceedings of the 9-th International Scientific Conference "MMA 2006 Flexible Technologies", 15-16 June 2006, Novi Sad, Srbija.

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Computer aided system for investigation of cutting forces and temperature in turning. Górnictwo Odkrywkowe (7-8). pp. 10-14. ISSN 0043-2075

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Tomov, Mite and Cichosz, Piotr (2009) Monitoring system for automation of experimental researches in cutting. Mechanical Engineering – Scientific Journal, Proceedings, 28 (2). pp. 41-60. ISSN 1857 – 5293

Kuzinovski, Mikolaj and Trajchevski, Neven and Fita, Stanislaw and Tomov, Mite (2006) Monitoring system in the experimental investigations of the temperature in the cutting process by machining with turning. In: Proceedings of the 9-th CIRP international workshop on modeling of machining operations, 11-12 May 2006, Bled, Slovenia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Tomov, Mite and Cichosz, Piotr (2010) Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process. Górnictwo Odkrywkowe, 3. pp. 148-153. ISSN 0043-2075

L

Leben, Stanko and Janevski, Aco and Sebenik, Anton and Osredkar, Uci (1992) The synthesis and characterization of polydibromoacetylene. Polymer Bulletin, 28 (3). pp. 287-292.

Lisickov, Kiril and Fidancevska, Emilija and Grujic, Radoslav and Srebrenkoska, Vineta and Kuvendziev, Stefan (2011) Sustainable development of gree solvent separation process. Proceedings of the International Scientifi c Conference Renewable Energy Sources and Sustainable Development. ISSN 978-999-55-49-72-5

M

Maksimov, Stefan and Jordeva, Sonja and Zhezhova, Silvana and Mojsov, Kiro and Janevski, Aco (2022) Methodology for determining the quantity of textile waste from the cutting process. Tekstilna industrija. pp. 29-36. ISSN 0040-2389

Mateska, Maja and Samardzioska, Todorka and Trombeva Gavriloska, Ana and Lepitkova, Sonja and Jovanovski, Milorad (2015) Mechanical properties of zeolit samples from Strmosh mine, Republic of Macedonia. Proceedings of the 16th International Symposium of MASE, Ohrid, Macedonia, 1–3 Oct 2015. pp. 359-364. ISSN ISBN: 608-4510-26-4

Mijajlovikj, Maja and Risteska, Svetlana and Srebrenkoska, Vineta and Kostadinoska, Biljana and Gogu, Julija (2017) Determination of activation energy of polymer composites using dynamic mechanical analysis. In: International Scientific Conference Contemporary Materials – Banja Luka. (Unpublished)

Mijalkovski, Stojance and Despodov, Zoran and Adjiski, Vancho and Doneva, Nikolinka (2023) Избор на рударска откопна метода според постапката на Shahriar&Bakhtavar. In: XIV стручно советување со меѓународно учество од областа на подземната и површинската експлоатација на минерални суровини, Подекс - Повекс 2023, 6-8 Oct 2023, Ohrid.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2022) Aplication of USB methodology for underground mining method selection. Undergorund mining engineering (40). pp. 15-26. ISSN 0354-2904

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka and Gocevski, Vanco (2022) Примена на методи за повеќекритериумско одлучување при избор на рударска откопна метода за подземна експлоатација. In: XIII-то Стручно советување од областа на подземната и површинската експлоатација, 14-16 Oct 2022, Ohrid.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka and Mijalkovska, Daniela (2021) MINING METHOD SELECTION FOR UNDERGROUND MINING WITH THE APPLICATION OF VIKOR METHOD. Underground Mining Engineering (39). pp. 11-22. ISSN 03542904

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka and Mijalkovska, Daniela (2021) Mining method selection for underground mining with the application of Prometee method. In: 3th International Multidisciplinary Geosciences Conference (IMGC2021), 14-15 Oct 2021, Mitrovica, Kosovo.

Mijalkovski, Stojance and Efe, Omer Faruk and Despodov, Zoran and Mirakovski, Dejan and Mijalkovska, Daniela (2022) Underground mining method selection with the application of TOPSIS method. GeoScience Engineering Journal, 68 (2). pp. 125-133. ISSN 1802-5420

Mijalkovski, Stojance and Efe, Omer Faruk and Zeqiri, Kemajl (2023) Application of Multi-Criteria Decision-Making Methods for the Underground Mining Method Selection. In: Handbook of Research on Sustainable Consumption and Production for Greener Economies. IGI Global, Publisher of Timely Knowledge, pp. 42-57. ISBN 9781668489697

Mijalkovski, Stojance and Lazarovski, Aleksandar and Doneva, Nikolinka (2024) Избор на начин за отворање на подземен рудник. In: XV-то Стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс - Повекс, 18-20 Oct 2024, Struga.

Mijalkovski, Stojance and Mirakovski, Dejan and Mijalkovska, Daniela (2022) Underground mining method selection with the application of ELECTRE method. In: 4th International multidisciplinary geosciences conference (IMGC2022), 13-14 Oct 2022, Mitrovica, Kosovo.

Mijalkovski, Stojance and Peltecki, Dragi and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2023) Application of the Fuzzy TOPSIS method for selecting an underground mining method. Acta Montanistica Slovaca, 28 (2). pp. 465-478. ISSN 1335-1788

Mijalkovski, Stojance and Peltecki, Dragi and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2021) METHODOLOGY FOR UNDERGROUND MINING METHOD SELECTION. Mining Science, 28. pp. 201-216. ISSN 2353-5423

Mijalkovski, Stojance and Stefanov, Vasko and Mirakovski, Dejan (2024) Application of the TOPSIS Method for Selecting the Location of the Main Warehouse. TRANSPORT & LOGISTICS: the International Journal, 24 (56). pp. 51-58. ISSN 2406-1069

Mijalkovski, Stojance and Stefanov, Vasko and Mirakovski, Dejan (2024) Application of the VIKOR method for solving problems in logistics. Logistics, Supply Chain, Sustainability and Global Challenges, 15 (1). pp. 1-9. ISSN 2784-7497

Mijalkovski, Stojance and Stefanov, Vasko and Mirakovski, Dejan (2024) Избор на местоположба на рударски магацин со примена на Promethee методата. In: XV-то Стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс - Повекс, 18-20 Oct 2024, Struga.

Mijalkovski, Stojance and Stefanov, Vasko and Mirakovski, Dejan (2024) Selection of the location of the main warehouse using the EDAS method. Natural Resources and Technology. ISSN 1857-6966

Mijalkovski, Stojance and Zeqiri, Kemajl and Despodov, Zoran and Adjiski, Vancho (2022) Underground mining method selection according to Nicholas methodology. Natural Resources and Technology, XVI (1). pp. 5-11. ISSN 1857-6966

Mijalkovski, Stojance and Despodov, Zoran and Adjiski, Vancho and Doneva, Nikolinka (2017) Methods for development of geodetic data foundations for the needs in the field of mining and geology. Natural resources and technologies, 11. pp. 5-15. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Adjiski, Vancho and Stefanovski, Dimitar (2017) Plan for waste management in the mine for production of lead and zinc "Zletovo" – Probishtip. In: 6th International Symposium Mining and environmental protection, 21-24 June 2017, Vrdnik, Serbia.

Mijalkovski, Stojance and Despodov, Zoran and Doneva, Nikolinka and Adjiski, Vancho (2016) Modern trends of geodesy works in underground mine for lead and zinc “Sasa”. Mining and metallurgy engineering Bor (1). pp. 89-94. ISSN 2406-1395

Mijalkovski, Stojance and Despodov, Zoran and Doneva, Nikolinka and Adjiski, Vancho (2016) Ore losses in underground mines for metal minerals. Natural Resources and Technologies, X (10). pp. 5-21. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Gorgievski, Cvetan and Bogdanovski, Goran and Mirakovski, Dejan and Hadzi-Nikolova, Marija and Doneva, Nikolinka (2013) Modern geodesy approach in underground mining. Natural Resources and Technologies, 7 (7). pp. 15-20. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2019) Моделски испитувања за одредување на искористувањето и осиромашувањето на рудата. In: XII Стручно советување од областа на подземната и површинската експлоатација (Подекс-Повекс 2019), 01-03 Nov 2019, Strumica, Macedonia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2018) Analysis of the ore recovery and ore dilution in the underground mine for lead and zinc “SASA“ - M. Kamenica. Journal of mining and geological sciences, 61. pp. 13-18. ISSN 2535-1184

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2018) Determination of the indicators for ore recovery and ore dilution with laboratory research. Natural resources and technology, XII (12). pp. 15-24. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2019) Development of the underground exploitation of metalic mineral resources in Republic of Macedonia. In: 19th conference with international participation “Waste Management – GzO’19 Urban Mining” and 14th conference with international participation “46th Jump over the Leather Skin”, 12-13 Apr 2019, Ljubljana, Slovenia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2017) Isohypse drawings for the needs in the field of mining and geology. In: X Стручно советување со меѓународно учество Подекс – Повекс ’17, 03-05 Nov 2017, Ohrid, Macedonia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2017) Methodology for optimization of coefficient for ore recovery in sublevel caving mining method. Underground Mining Engineering (30). pp. 19-27. ISSN 0354-2904

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka and Gocevski, Vanco (2018) Determination of the most important parameters which have impact on ore recovery and ore dilution in the sublevel caving mining method in “Sasa“ mine. In: XI expert conference with international participation in the area of underground and surface exploitation of mineral resources, "Podeks-Poveks 2018", 09-11 Nov 2018, Struga, Macedonia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Nachkovski, Darko and Doneva, Nikolinka (2018) Technologies for underground exploitation applied in the mine for lead and zinc "Zletovo" - Probishtip. Working Paper. Scientific and technical union of mining, geology and metallurgy, Devin, Bulgaria.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Doneva, Nikolinka and Adjiski, Vancho (2015) Recovery and ore dilution at the mining methods. Natural Resources and Technologies, 9 (9). pp. 19-28. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Doneva, Nikolinka and Adjiski, Vancho and Mitić, Saša (2016) Economical parameters that have impact on successful operation of mines. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Nov 2016, Strumica, Macedonia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Doneva, Nikolinka and Hadzi-Nikolova, Marija and Ivanovski, Dejan (2015) Method for determining on the indicators for recovery and dilution of the ore. In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Hadzi-Nikolova, Marija and Mitic, Sasa (2015) Determination and monitoring of ore recovery and dilution coefficients in Sasa lead and zinc mine - M. Kamenica, R.Macedonia. Underground Mining Engineering, 23 (26). pp. 1-9. ISSN 0354-2904

Mijalkovski, Stojance and Peltecki, Dragi and Zeqiri, Kemajl and Kortnik, Joze and Mirakovski, Dejan (2020) Risk assessment at workplace in underground lead and zinc mine with application of fuzzy TOPSIS method. Journal of the Institute of Electronics and Computer, 2 (1). pp. 121-141. ISSN 2643-8240

Mitkovski, Mladen and Cingoski, Vlatko and Gelev, Saso (2017) Performance Modelling of PV Arrays Under Specific Working Conditions. Zbornik radova sa XXII međunarodnog naučno - stručnog skupa „Informacione tehnologije - sadašnjost i budućnost“, XXII. pp. 42-45. ISSN 978-86-85775-20-8

Mitreva, Elizabeta and Golomeova, Saska (2013) Менаџмент на конфекциско претпријатие - скрипта. ISBN 978-608-4708-39-1.

Mojsov, Kiro (2023) Ензими за доработка и нега на текстил. Универзитет "Гоце Делчев", Технолошко-технички факултет, 2023, Штип. ISBN 978-608-244-959-3

Mojsov, Kiro (2019) Enzymatic desizing, bioscouring and enzymatic bleaching of cotton fabric with glucose oxidase. The Journal of the Textile Institute, 110 (7). pp. 1032-1041. ISSN 0040-5000 (Print), 1754-2340 (Online)

N

Najdoski, Metodija and Koleva, Violeta and Demiri, Sani and Stojkovikj, Sasho (2012) A simple chemical method for deposition of electrochromic potassium manganese oxide hydrate thin films. Materials Research Bulletin, 47 (9). pp. 2239-2244. ISSN 1873-4227

Najdoski, Metodija and Koleva, Violeta and Stojkovikj, Sasho and Todorovski, Toni (2015) Electrochromic thin films of sodium intercalated vanadium(V) oxide xerogels: Chemical bath deposition and characterization. Surface and Coatings Technology, 277. pp. 308-317. ISSN 1879-3347

Naoe, Takuto and Noguchi, So and Cingoski, Vlatko and Igarashi, Hajime (2016) Fast Magnetic Flux Line Allocation Algorithm for Interactive Visualization Using Magnetic Flux Line Existence Probability. IEEE Transactrion on Magnetics, 52 (3). ISSN 0018-9464

Naseva, Simona and Srebrenkoska, Vineta and Risteska, Svetlana and Stefanoska, Maja and Srebrenkoska, Sara (2015) Mechanical properties of filament wound pipes: effects of winding angles. Quality of Life, 6 (1-2). pp. 10-15. ISSN 1986-602X

Naumoski, Jovan and Smileski, Rose and Stoevska, D. (1998) Одреѓивање утицаја површине узорака на брзину атмосферске корозије челика. Књига радова XIV. Југословенски симпозиум о електрохемији, Бечиќи, 15-18 June 1998, Хемијско друштво Црне Горе. pp. 101-102.

Nikolovski, Bruno (2020) Евалуација на методи за рана детекција на оралните премалигни и малигни лезии. Doctoral thesis, Стоматолошки факултет, Универзитет Св. Кирил и Методиј.

Noguchi, So and Cingoski, Vlatko (2017) Simulation of Screening Current Reduction Effect in REBCO Coils by External AC Magnetic Field. IEEE Transaction on Applied Superconductivity, 27 (4). ISSN 1051-8223

Noguchi, So and Matsumoto, Shinya and Cingoski, Vlatko (2018) An Adaptive FEM Based on Magnetic Field Conservation Applying to Ferromagnetic Problems. IEEE Transactrion on Magnetics, 54 (3). ISSN 0018-9464

P

Pan, Xuefeng and Kochovski, Zdravko and Wang, Yong-Lei and Sarhan, Radwan M. and Härk, Eneli and Gupta, Siddharth and Stojkovikj, Sasho and El-Nagar, Gumaa A. and Mayer, Matthew T. and Schürmann, Robin and Deumer, Jérôme and Gollwitzer, Christian and Yuan, Jiayin and Lu, Yan (2023) Poly(ionic liquid) nanovesicles via polymerization induced self-assembly and their stabilization of Cu nanoparticles for tailored CO2 electroreduction. Journal of Colloid and Interface Science, 637. pp. 408-420. ISSN 1095-7103

Pardo Pérez, Laura C. and Arndt, Alexander and Stojkovikj, Sasho and Ahmet, Ibbi Y. and Arens, Joshua T. and Dattila, Federico and Wendt, Robert and Guilherme Buzanich, Ana and Radtke, Martin and Davies, Veronica and Höflich, Katja and Köhnen, Eike and Tockhorn, Philipp and Golnak, Ronny and Xiao, Jie and Schuck, Götz and Wollgarten, Markus and López, Núria and Mayer, Matthew T. (2021) Determining Structure-Activity Relationships in Oxide Derived CuSn Catalysts During CO2 Electroreduction Using X-Ray Spectroscopy. Advanced Energy Materials, 12 (210332). ISSN 1614-6840

Pardo Pérez, Laura C. and Arndt, Alexander and Stojkovikj, Sasho and Mayer, Matthew T. (2020) Cu-Sn Bimetallic CO2 Reduction Catalysts: Assembling the Puzzle of How Composition, Structure, Morphology and Speciation Affect Activity and Selectivity. In: PRiME 2020 (ECS, ECSJ, & KECS Joint Meeting), October 4, 2020 - October 9, 2020, Online.

Pardo Pérez, Laura C. and Stojkovikj, Sasho and Arndt, Alexander and Ahmet, Ibbi Y. and Arens, Joshua T. and Dattila, Federico and López, Núria and Mayer, Matthew T. (2021) Applications of X-ray Spectroscopy for in situ Study of CO2 Conversion Electrocatalysts. In: International Conference on Frontiers in Electrocatalytic Transformations (INTERECT), 22-23 Nov 2021, Valencia (Spain) and online.

Paunovic, Perica and Dimitrov, Aleksandar and Popovski, Orce (2009) Effect of activation/purification of multiwalled carbon nanotubes (MWCNTs)on the activity of non-platinum based hypo-hyper d-electrocatalysts for hydrogen evolution. Materials Research Bulletin, 44 (9). pp. 1816-1821.

Pavlova, Elvira and Risteska, Svetlana and Srebrenkoska, Vineta and Kostadinoska, Biljana and Petkoska, Biljana (2016) Glass fabrics as reinforcement for composite plates. In: VII International Metallurgy Congress, Metallurgy, Materials and Environmental, 09-12 June 2016, Ohrid, Macedonia. (Unpublished)

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Нов метод за динамичко испитување на запалки за противтенковски мини. Зборник на трудови од 8-ми симпозиум за теоретска и применета механика, Скопје, 3-5 Oct 2002. pp. 105-111.

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Воспоставување критериуми за испитување запалки за противтенковски мини. Зборник на трудови од „Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија“, Охрид 2002. pp. 395-403.

Petreski, Drage and Smileski, Rose and Dojcinovski, Metodija (2010) Трговија со конвенционалното оружје како глобален предизвик. Современа македонска одбрана. pp. 75-84. ISSN 1409-8199

Petreski, Drage and Smileski, Rose and Dojcinovski, Metodija and Gjozo, Kemo (2013) Трговија со конвенционалното оружје како глобален предизвик. Современа македонска одбрана. pp. 75-84.

Petrovski, Aleksandar and Mijalkovski, Stojance (2024) Поставување на интерна гео-позициона мрежа за мониторинг на вработените во рудниците. In: XV-то Стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс - Повекс, 18-20 Oct 2024, Struga.

Pop Metodieva, Biljana and Srebrenkoska, Sara and Srebrenkoska, Vineta (2015) The design of glass fiber//epoxy composite pipes by the implementation of the full factorial experimental design. Quality of Life, 6 (3-4). pp. 83-87. ISSN 1986-602X (print); 1986-6038 (online)

Pop Metodieva, Biljana and Zhezhova, Silvana and Srebrenkoska, Vineta and Naseva, Simona and Srebrenkoska, Sara (2015) Design of polymer composite pipes produced by filament winding technology. In: XII International Congress Machines, Technologies, Materials 2015, 16-19 Sept 2015, Varna, Bulgaria.

Pop Metodieva, Biljana and Zhezhova, Silvana and Srebrenkoska, Vineta and Naseva, Simona and Srebrenkoska, Sara (2016) Design of polymer composite pipes produced by filament winding technology. Machines, Technologies, Materials, 10 (1). pp. 23-26. ISSN 1313-0226

Popovski, Orce and Smileski, Rose and Trajkovska - Petkoska, Anka (1999) Детекција на Циклотриметилентринитроамин и 1-метил-2,4,6-тринитробензен (ТНТ) со помош на течна хроматографија. Зборник на објавени трудови од XVI. Конгрес на хемичарите и технолозите, со меѓународно учество, 28-30 Oct 1999, Скопје. pp. 443-446.

R

Risteska, Svetlana and Samakoski, Blagoja and Srebrenkoska, Vineta and Stefanoska, Maja (2015) Flexural properties of hybrid composite parts. Quality of Life, 6 (1-2). pp. 5-9. ISSN 1986-602X

Risteska, Svetlana and Samakoski, Blagoja and Srebrenkoska, Vineta and Stefanovska, Maja (2015) Determination of flexural properties of hybrid composite parts. In: IV International Congress “Engineering, Environment and Materials in Processing Industry, 04–06 March 2015, Jahorina, Bosnia and Herzegovina.

Risteska, Svetlana and Trajkovska - Petkoska, Anka and Samak, Samoil and Drinovsky, Marian (2020) Annealing Effects on the Crystallinity of Carbon Fiber-Reinforced Polyetheretherketone and Polyohenylene Laminate Composites Manufactured by Laser Automatic Tape Placement. Materials Science (Medžiagotyra), 26 (3). ISSN 1392–1320

Risteska, Svetlana and Trajkovska Petkoska, Anka and Samak, Samoil and Drienovsky, Marian (2020) Annealing Effects on the Crystallinity of Carbon Fiber-Reinforced Polyetheretherketone and Polyohenylene Laminate Composites Manufactured by Laser Automatic Tape Placement. Materials Science (Medžiagotyra), 26 (3). ISSN 1392–1320

Risteski, Sanja (2021) Филмска ревија на студентите на ТТФ. [Show/Exhibition]

Risteski, Sanja (2021) Помеѓу личноста и просторот - (не)време. [Show/Exhibition]

Risteski, Sanja (2021) Културното наследство низ призмата на ликовната дејност. [Show/Exhibition]

Risteski, Sanja (2021) Градската облека како дел од културното наследство во Штип и нејзината трансформација во современите модни трендови на облека. Културното наследство низ призмата на ликовната дејносt. pp. 44-58.

Risteski, Sanja (2021) Кружната економија како модел за решавање на текстилниот отпад во Општина Штип. [Project]

Risteski, Sanja (2022) Изложба на модели изработени од текстилен отпад. [Show/Exhibition]

Risteski, Sanja (2022) Дизајн на заштитна облека. ISBN 978-608-244-910-4.

Risteski, Sanja (2022) Обука за можностите за редуцирање, рециклирање, реупотреба и пренамена на текстилниот отпад од конфекциските индустрии. In: Oбука за можностите за редуцирање, рециклирање, реупотреба и пренамена на текстилниот отпад од конфекциските индустрии..

Risteski, Sanja (2022) Обука со луѓето со посебни потреби и нивно директно вклучување во борбата за инклузија во правец на продуктивност во општеството. In: Обука со луѓето со посебни потреби и нивно директно вклучување во борбата за инклузија во правец на продуктивност во општеството..

Risteski, Sanja (2022) Унапредување на технолошкиот процес за искористување на текстилниот отпад. [Project]

Risteski, Sanja (2023) Работилница за искористување и пренамена на текстилен отпад во нови производи. [Project]

Risteski, Sanja (2023) Дизајн и конструкција на детски костими за новогодишна престава. [Show/Exhibition]

Risteski, Sanja (2023) Дизајн на костими за престава "Девојчето и дванаесетте месеци". [Show/Exhibition]

Risteski, Sanja (2023) Идејно модно решение за детска училишна универзална униформа. Општина Штип.

Risteski, Sanja (2021) Моден перформанс на студентите на ТТФ на Научно културните средби "Десет дена Крушевска Република" 2021. [Show/Exhibition]

Risteski, Sanja (2021) 3R (3Р) Редуцирај, реупотреби, рециклирај. [Project]

Risteski, Sanja (2022) 4 Р-Редуцирај, рециклирај, реупотреби и пренамени, социјална инклузија преку кружна економија. [Project]

Risteski, Sanja (2022) Отпадот не е отпад сѐ додека го искористуваш: Завршен перформанс на студентите на ТТФ како дел од Проектот „4Р“ во соработка со ФРЛЗ - Штип. [Show/Exhibition]

Risteski, Sanja (2022) Отпадот не е отпад сѐ додека го искористуваш: Завршен перформанс на студентите на ТТФ како дел од Проектот „4Р“ во соработка со ФРЛЗ - Штип. Casopis: Tekstilna industrja.

Risteski, Sanja (2022) Моден Викенд Скопје- Graduation Fashion Show. [Show/Exhibition]

Risteski, Sanja (2022) Kреативно-едукативна работилница, во рамките на проектот-"4Р( редуцирај, рециклирај, реупотреби и пренамени), поддржан од ФООМ, организирана во просториите на ЦПЛИП „Порака" Штип. In: Kреативно-едукативна работилница, во рамките на проектот-"4Р, 02 Sept 2022, Stip.

Risteski, Sanja (2022) No For Waste Yes for Art NO Waste Art Design. [Show/Exhibition]

Risteski, Sanja (2021) "Reborn" - Manassini. [Video]

Risteski, Sanja (2021) "Reborn" - дизајни на облека како дел од проектот „Културното наследство низ призмата на ликовната дејност“. [Project]

Risteski, Sanja (2022) "Reduce, reuse, recycle" Textile waste reuse workshop. In: Textile waste reuse workshop, 21 Apr 2022, Stip.

Risteski, Sanja (2021) -Пандемизам- (креативна приказна на една on-line генерација). [Video]

Risteski, Sanja and Despot, Katerina and Sandeva, Vaska (2021) Видео перформанс - Помеѓу личноста и просторот (не)време. [Video]

Risteski, Sanja and Golomeova, Saska and Jordeva, Sonja and Zhezhova, Silvana (2022) Од текстилен отпад до готов производ. In: Од текстилен отпад до готов производ, 01 Nov 2022, Stip.

Risteski, Sanja and Golomeova, Saska and Jordeva, Sonja and Zhezhova, Silvana (2023) Recognition of social and ecological changes. Presentation of new ways in textile material procurement. Optimization of supply chains according to the "Green Button". In: Recognition of social and ecological changes. Presentation of new ways in textile material procurement. Optimization of supply chains according to the "Green Button", УГД - Штип. (Unpublished)

Risteski, Sanja and Golomeova, Saska and Zhezhova, Silvana and Jordeva, Sonja (2023) „Мода меѓу редови-класици“ – проект одобрен и финансиран од Министерството за култура. [Project]

Risteski, Sanja and Golomeova, Saska and Zhezhova, Silvana and Jordeva, Sonja (2023) Изложба на дела инспирани од светските литературни класици. [Show/Exhibition]

Risteski, Sanja and Golomeova, Saska and Zhezhova, Silvana and Jordeva, Sonja (2023) Изложба на ТТФ, 16 години УГД- уметнички изложби и перформанси. [Show/Exhibition]

Risteski, Sanja and Golomeova, Saska and Zhezhova, Silvana and Jordeva, Sonja (2023) Годишната студентска изложба 2023. [Show/Exhibition]

Risteski, Sanja and Golomeova Longurova, Saska and Zhezhova, Silvana and Jordeva, Sonja (2022) There is no Planet B. (Изложба на униктни производи од текстилен отпад). [Show/Exhibition]

Risteski, Sanja and Longurova, Saska and Zhezhova, Silvana and Jordeva, Sonja (2023) „Крушево град на култура, традиција, историја 2023“ - Модна ревија:„Во светот на литературните класици". [Project]

Risteski, Sanja and Srebrenkoska, Vineta (2020) Appearance of protective clothing over the centuries. Naučni i stručni časopis tekstilne industrije (4). pp. 1-96. ISSN 0040-2389

Risteski, Sanja and Srebrenkoska, Vineta (2020) Determination of the load in different operation In sewing model of woman shirt. Naučni i stručni časopis tekstilne industrije (3). pp. 1-76. ISSN 0040-2389

Risteski, Sanja and Srebrenkoska, Vineta (2021) Fashion in a time of Pandemic. Tekstilna industrija. ISSN 0040-2389

Risteski, Sanja and Srebrenkoska, Vineta (2022) Handmade crafts throughout history and its redesign into a modern female model. Casopis: Tekstilna industrija, 70 (4).

Risteski, Sanja and Srebrenkoska, Vineta (2021) Impact of the type of cutting layout on the consumption of textile material. Savremeni trendovi i inovacije u tekstilnoj industriji.

Risteski, Sanja and Srebrenkoska, Vineta (2020) Textile waste from confection industries and possibilities for its recycling. Naučni i stručni časopis tekstilne industrije (4). pp. 1-96. ISSN ISSN 0040-2389

Risteski, Sanja and Zhezhova, Silvana and Golomeova, Saska and Jordeva, Sonja (2023) Fashion in Spain as an inspiration for design and construction of contemporary children's clothing. In: VI International scientific conference contemporary trends and innovations in the textile industry, 14-15 Dec 2023, Belgrade.

Risteski, Sanja and Zhezhova, Silvana and Golomeova, Saska and Jordeva, Sonja and Dimitrijeva, Vanga and Kertakova, Marija (2024) Студентска годишна изложба. [Show/Exhibition]

Risteski, Sanja and Zhezhova, Silvana and Golomeova, Saska and Jordeva, Sonja and Dimitrijeva-Kuzmanoska, Vanga and Dimitrijeva, Vanga (2024) The costume in Egypt as inspiration for the redesign of men's contemporary clothes. 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry – CT&ITI 2024, 73 (2). pp. 326-333. ISSN 1849-9767

Risteski, Sanja and Zhezhova, Silvana and Jordeva, Sonja and Golomeova, Saska and Dimitrijeva, Vanga (2024) ECO-PRINT training. In: ECO-PRINT training, 15-20 Април 2024, Кампус 2, Технолошко-технички факултет.

Risteski, Sanja (2020) Колекција на дизајнерски заштитни маски наменети за донација. [Show/Exhibition]

Risteski, Sanja (2018) Design and performance of clothes for special purpose. PhD thesis, Goce Delcev University, Stip.

Risteski, Sanja (2017) Komentar - Perspective razvoja tekstilne industrije u Republici Makedoniji. Tekstilna industrija, 65 (2). pp. 1-76. ISSN 0040-2389

Risteski, Sanja and Kortoseva, Sonja and Srebrenkoska, Vineta (2019) Inter-phase control of defects and reasons for their occurrence in the process of sewing women's trousers. Tekstilna industrija (1). pp. 1-80. ISSN 0040-2389

Risteski, Sanja and Srebrenkoska, Vineta (2020) Defects detection in the first manufactured module - ensuring erors flow in the garment manufacturing process. Tekstilna industrija. ISSN 0040-2389

Risteski, Sanja and Srebrenkoska, Vineta (2017) Design and construction of advanced model of protective clothes. Tekstilna industrija, 64 (1). pp. 29-35. ISSN 0040-2389

Risteski, Sanja and Srebrenkoska, Vineta (2020) Optimizing the time of work performance in the process of sewing woman shirt. Contemporary trends and innovations in the textile industry CT&ITI 2020. ISSN 677(082) / 687.1(082)

Risteski, Sanja and Srebrenkoska, Vineta (2019) Textile fibers and materials for design and construction of contemporary modular vest for special (military) purposes. Contemporary trends and innovations in the textile industry. ISSN 978-86-900426-1-6

Risteski, Sanja and Srebrenkoska, Vineta and Demboski, Goran and Dimeski, Dimko and Zhezhova, Silvana (2018) Material utilization in the process of cutting protective vest for special purpose. In: 8th International Scientific Conference on Defensive Technologies, 11-12 October 2018, Belgrade.

Risteski, Sanja and Srebrenkoska, Vineta and Zhezhova, Silvana (2017) Analysis of composite materials based on polyethylene fibres for protective clothes. Knowledge - International Journal, Scientific and Applicative Papers, 20.5 (5). pp. 2147-2525. ISSN 1857-923X

Risteski, Sanja and Srebrenkoska, Vineta and Zhezhova, Silvana (2017) Applying of different fabrics for design of the protective military clothes. Quality of Life, 8 ((1-2)). pp. 56-63. ISSN 1986-602X

Risteski, Sanja and Srebrenkoska, Vineta and Zhezhova, Silvana and Demboski, Goran (2018) Material optimization in the process of cutting the modular model of vest for special purpose. Tekstilna industrija, 66 (3). pp. 8-13. ISSN 0040-2389

Risteski, Sanja and Zhezhova, Silvana and Srebrenkoska, Vineta (2017) Commonly used textile fibers in composite industry for special purposes. International Journal Knowledge, 16.4. pp. 1673-1678. ISSN 1857-923X

Risteski, Sanja and Zhezhova, Silvana and Srebrenkoska, Vineta (2017) Textile materials used in military protective clothes design. V International Congress “Engineering, Environment and Materials in Processing Industry“. ISSN 978-99955-81-21-3

S

Samak, Samoil and Dimovski, Igor and Trompeska, Mirjana and Hristoski, Martin and Kochoski, Filip and Dukovski, Vladimir (2018) Computer-based simulation and validation of robot accuracy improvement method and its verification in robot calibration procedure. In: ETAI 2018.

Samak, Samoil and Dimovski, Igor and Dukovski, Vladimir and Trompeska, Mirjana (2016) Volumetric calibration for improving accuracy of AFP/ATL machines. In: 7th International Scientific Conference on Defensive Technologies OTEH.

Samak, Samoil and Dimovski, Igor and Trompeska, Mirjana and Hristoski, Martin and Kochoski, Filip and Dukovski, Vladimir (2018) Computer-based simulation and validation of robot accuracy improvement method and its verification in robot calibration procedure. In: ETAI 2018 International Conference, ETAI Society of Macedonia, 20–22 Sept 2018, Struga, R.N.Macedonia.

Samak, Samoil and Dimovski, Igor and Trompeska , Mirjana and Dukovski, Vladimir (2016) Avoiding heavy computations in inverse calibration procedure for 7 DOF robot manipulator. Journal of Electrical Engineering and Informatiоn Technologies, 1 (2). ISSN 2545–4250

Samak, Samoil and Dukovski, Vladimir and Risteska, Svetlana and Trajkoski, Sase (2020) Some Experimental Investigation of Products from Thermoplastic Composite Materials Manufactured with Robot and LAFP. International Journal of Engineering Research & Technology (IJERT), Vol. 9 (Issue ). ISSN 2278-0181

Samardzioska, Todorka and Jovanovski, Milorad and Lepitkova, Sonja (2017) Zeolites - sustainable building material. Proceedings of the 1st International Conference on Construction materials for sustainable future (CoMS_2017), Zadar, Croatia, 19-21 April 2017. pp. 146-151. ISSN ISBN: 978-953-8168-04-8

Slavkova, Emilija and Risteski, Sanja and Srebrenkoska, Vineta (2020) The designing of composite laminates for aplication in autompotive industies. Contemporary trends and innovations in the textile industry CT&ITI 2020. ISSN 677(082) / 687.1(082)

Smileski, Rose (1999) Фотоелектрохемиски испитувања на оксидните слоеви на бакар во деаерирана синтетичка морска вода. Зборник на објавени трудови од XVI. Конгрес на хемичарите и технолозите на Македонија со меѓународно учество, Скопје, 28-30 Oct 1999. pp. 607-610.

Smileski, Rose and Hadzi Jordanov, Svetomir (1997) Карактеризација на оксидниот слој создаден врз бакарот при корозија во синтетичка морска вода. Зборник на објавени трудови XV. Конгрес на хемичарите и технолозите на Македонија, со меѓународно учество. 02-04 Oct 1997, Скопје. pp. 110-112.

Smileski, Rose and Hadzi Jordanov, Svetomir (1995) Parametri elektrodne reakcija kod korozije bakra i mesinga u sintetickoj morskoj vodi. Knjiga radova 13. Jugoslovenski simpozijum o elektrohemiji, sa medjunarodnim ucescem, Vrnjacka Banja, 11-15 June 1995. pp. 73-75.

Smileski, Rose and Naumoski, Jovan (2002) Испитување на оксидниот слој на бакарот создаден при корозија во синтетска морска вода. Прв конгрес на инжинерите на Македонија, Струга, 24-26 Oct 2002. pp. 267-272.

Smileski, Rose and Naumoski, Jovan (1998) Ispitivanje oksidnog sloja bakra. Knjiga radova XIV Jugoslovenski simpozium o elektrohemiji, Becici, 15-18 June 1998, Hemijsko drustvo Crne Gore. pp. 103-104.

Smileski, Rose and Popovski, Orce (2002) Избор на растворувач за идентификација на бризантните експлозивни материи. Зборник на трудови од Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија, Охрид, 25-28 Oct 2002, Воена академија „Генерал Михаило Апостолски” - Скопје. pp. 65-72.

Smileski, Rose and Popovski, Orce (2001) Детекција и анализа на стопанските експлозиви по нивното активирање - експлозија. In: Второ заседание од советувањето на тема „Рударско геолошко инженерство во рударските, градежните и водостопанските објекти“, 18-20 Oct 2001, Струга.

Smileski, Rose and Popovski, Orce and Naumoski, Jovan (2003) Determination of chemical stability of gunpowders by qualitative and quantitative methods. In: 6th Conference on weapon systems, 28-30 April 2003, Brno, Czech Republic.

Smileski, Rose and Popovski, Orce and Trajkovska - Petkoska, Anka (2000) Хроматографско испитување на амонимуннитрат и тринитротолуен во бризантните експлозивни материи кои се употребуваат во стопанството. In: II. Советување за дупчење и минирање, со меѓународно учество, 25-27 May 2000, Охрид, Македонија.

Smileski, Rose and Popovski, Orce and Trajkovska - Petkoska, Anka (2000) Хроматографско определување на содржината на стабилизаторот во потисните експлозивни материи. Современа македонска одбрана (1). pp. 157-161.

Smileski, Rose and Trajkovska - Petkoska, Anka and Popovski, Orce (2002) Хроматографско испитување на амонимумнитратните експлозиви кои се употребуваат во стопанството. Современа македонска одбрана (5). pp. 57-66.

Smileski, Rose and Trajkovska - Petkoska, Anka and Popovski, Orce (2000) Испитување на хемиската стабилност на потисните експлозивни материи со помош на течна хроматографија. Годишник на факултетот за безбедност, Скопје, 18 (1). pp. 71-80. ISSN 1409-5068

Smileski, Rose and Trajkovska - Petkoska, Anka and Popovski, Orce (2001) Ispitivanje hemijske stabilnosti baruta metodom tecne hromatografija. In: XXI Simpozium o eksplozivnim materijama, Jugoslovenski komitet za eksplozivne materije, 21-23 Nov 2001, Tara.

Spasovski, Orce and Spasovski, Daniel (2016) Хидрогеолошки истражувања за обезбедување на потребните количини на подземна вода за водоснабдување на село Крушица, општина Свети Николе. In: Podeks - Poveks 2016, 11-13 Dec 2016, Strumica, Macedonia.

Spasovski, Orce and Spasovski, Daniel and Zlatkov, Risto (2016) Третман на отпадните води од технолошкиот процес на фабриката за производство на месо и сувомеснати производи МИК од Свети Николе, Р. Македонија. In: Podeks-Poveks'16, 11-13 Nov 2016, Strumica, Macedonia.

Spritova, Kika and Spasovski, Orce (2016) Геохемиски карактеристики на скарновите од наоѓалиштето Иберли. In: Podeks-Poveks'16, 11-13 Nov 2016, Strumica, Macedonia.

Srebrenkoska, Sara (2022) COST Action CA21155 Advanced Composites under HIgh STRAin raTEs loading: a route to certification-by-analysis (HISTRATE). [Project] (In Press)

Srebrenkoska, Sara (2023) COST Action CA22132, Open Network on DEM Simulations (ON-DEM). [Project] (In Press)

Srebrenkoska, Sara and Avramovska, Ivana and Krcheva, Violeta (2023) Analysis of Steel Construction, Construction of a Canopy in the Function of a Facility for Light Industry. International Journal of Research Publication and Reviews (IJRPR), 4 (10). pp. 216-220. ISSN 2582-7421

Srebrenkoska, Sara and Kochoski, Filip and Srebrenkoska, Vineta and Risteska, Svetlana and Kotynia, Renata (2023) Effect of Process Parameters on Thermal and Mechanical Properties of Filament Wound Polymer-Based Composite Pipes. Polymers 2023 Special Issue Development in Thermosetting Polymers, 15 (13).

Srebrenkoska, Sara and Kochoski, Filip and Srebrenkoska, Vineta and Risteska, Svetlana and Kotynia, Renata (2023) Effect of Process Parameters on Thermal and Mechanical Properties of Filament Wound Polymer-Based Composite Pipes. Polymers, 15 (13). ISSN 2073-4360

Srebrenkoska, Sara and Srebrenkoska, Vineta and Cekerovska, Marija and Cekerovski, Todor (2024) Design and Calculation of Products from Composite Materials Using Software. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 28. pp. 252-258. ISSN 2602-3199

Srebrenkoska, Vineta (2024) Preparation of innovative polymer composite materials for food packaging. In: 4th Circul-a-bility Conference, 11-13 Sept 2024, Aarhus, Denmark. (Unpublished)

Srebrenkoska, Vineta and Andronikov, Darko and Janevski, Aco (2020) Rethinking packaging for circular and sustainable food supply chains of the future (circul-a-bility). [Project]

Srebrenkoska, Vineta and Risteska, Svetlana and Janevski, Aco and Andronikov, Darko (2019) Advanced Engineering and Research of aeroGels for Environment and Life Sciences (AERoGELS). [Project]

Srebrenkoska, Sara and Zhezhova, Silvana and Risteski, Sanja and Cekerovska, Marija and Srebrenkoska, Vineta and Risteska, Svetlana (2018) Aplication of factorial experimental design in predicting properties of polymer composites. Balkan Journal of Applied Mathematics and Informatics, 1 (1). pp. 85-88. ISSN 2545-479X; 2545-4803 online

Srebrenkoska, Vineta (2010) Доживотно учење. In: Dissemination confference, 22 March 2010, Skopje, R.Macedonia.

Srebrenkoska, Vineta (2013) Развој на одржлива технологија за производство на нови композити со обезбедување на повратен тек на отпадниот материјал. [Project] (In Press)

Srebrenkoska, Vineta (2013) COST Action TU1205 next generation design guidelines for composites in construction. [Project] (In Press)

Srebrenkoska, Vineta (2013) COST Action TU1301 norm for building materials (NORM4BUILDING). [Project] (In Press)

Srebrenkoska, Vineta (2006) Characterization of kenaf/PLA composites. In: ECO-PCCM Fourth Meeting, 6-7 Apr 2006, Sofia, Bulgaria. (Unpublished)

Srebrenkoska, Vineta (2005) Comparation of kenaf fiber composites to structural composites produced by "Eurokompozit". [Experiment]

Srebrenkoska, Vineta (2010) Creation of university-enterprise cooperation networks for education on sustainable technologies. In: Dissemination confference, 24 June 2010, Stip, R.Macedonia.

Srebrenkoska, Vineta (2014) Design of filament wound glass reinforced plastic (GRP) pipes for construction. In: Next Workshop - Generation Design Guidelines for Composites in Construction, 22 October 2014, Kaiserslautern, Germany. (Unpublished)

Srebrenkoska, Vineta (2006) Development and design of recycling-reuse of composite components. In: ECO-PCCM Fifth Meeting, 06, 4-5 Sept 2006, Barcelona, Spain.

Srebrenkoska, Vineta (2011) Dust separation on bio mass combustion plants. In: Course development workshop 1, 17-21 Jan 2011, Ohrid, Macedonia.

Srebrenkoska, Vineta (2012) Eko kompozitne materijale. In: Kurs održive tehnologije u hemijskoj, prehrambenoj i farmacutskoj industriji, 07-08 Maj 2012, Novi Sad. (Unpublished)

Srebrenkoska, Vineta (2014) Environmentally friendly technologies for new polymer compozite materials: challenges and opportunites. In: Sеvеnтh International Scientific Conference Contemporary Materials, 21-22 Dec 2014, Banja Luka. (Unpublished)

Srebrenkoska, Vineta (2007) Fabrication of compression molded eco-composites: optimal process conditions. [Experiment]

Srebrenkoska, Vineta (2016) Investigation of the possibilities for application of NORM into polymer materials. [Experiment] (Submitted)

Srebrenkoska, Vineta (2011) Lifelong Learning in the field of the sustainable technologies. In: Course development workshop 1, 17- 21 Jan 2011, Ohrid, Macedonia. (Unpublished)

Srebrenkoska, Vineta (2015) Mechanical and thermal characterization of the filament wound composites for construction. University in Sheffield. (Unpublished)

Srebrenkoska, Vineta (2014) New Composites-based on natural fibers. In: Next Generation Design Guidelines for Composites in Construction, 13-14 March 2014, Lyon, France. (Unpublished)

Srebrenkoska, Vineta (2002) Obtaining and characterization of composite material base on ablative phenolic resin and carbon fibers. Masters thesis, Faculty of Technology and Metallurgy, St. Cyril and Methodius University, Skopje, R. Macedonia.

Srebrenkoska, Vineta (2009) Obtaining and characterization of polymer eco-composites: comparison with conventional and the possibility of reusing. PhD thesis, Faculty og Technology and Metallurgy, University St Cyril and Methodius, Skopje, R. Macedonia.

Srebrenkoska, Vineta (2012) Polymer eco-composite materials – end of life treatment. In: Kurs održive tehnologije u hemijskoj, prehrambenoj i farmacutskoj industriji, 05 May 2012, Tuzla.

Srebrenkoska, Vineta (2007) Processing of PLA/RS and PLA/Kenaf pellets into composite panels. In: Sixth Meeting, 28-29 March 2007, Budapest, Hungary.

Srebrenkoska, Vineta (2010) Screening and analyzing the status of knowledge in industry concerning sustainability and formulation the first course scheme. In: Meeting, 2010, Skopje. (Unpublished)

Srebrenkoska, Vineta (2010) Screening and analyzing the status of knowledge in industry concerning sustainability and formulation the first course scheme. In: Tempus workshop, 24 June 2010, Stip, R.Macedonia.

Srebrenkoska, Vineta (2016) Self-healing As preventive Repair of Concrete Structures. [Project] (In Press)

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2010) Biocomposites Based on Poly (Lactic Acid) and Their Recyclability. Quality of Life, 2 (1-2). pp. 21-32. ISSN 1986-602X

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2009) Optimizacija na procesot pultruzija za proizvodstvo na kompozitni profili. [Experiment]

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2014) Preparation and recycling of polymer eco-composites. In: MatCatNet Workshop "From molcules to functionalised materials", 5-10 Sept 2014, Ohrid Macedonia.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2011) Production of new eco-materials based on poly (lactic acid) and natural fibers. Conference Proceedings, International Congress, Engineering, ecology and materials in the processing industry. ISSN 978-99955-81-00-8

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2011) Thermal characterization of the composites based on poly(lactic acid). Conference Proceedings, XIII YUCORR International Conference. ISSN 978-86-82343-14-1

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Avella, Maurizio and Errico, Maria and Gentile, Gennaro (2008) Recycling of polypropylene 1 based eco-composites. Polymer International, 57 (11). pp. 1252-1257. ISSN 1097-0126

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Avella, Maurizio and Errico, Maria and Gentile, Gennaro (2009) Utilization of Recycled Polypropylene for Production of Eco-Composites. Polymer-Plastics Technology and Engineering, 48 (11). pp. 1113-1120. ISSN 0360-2559 (print) 1525-6111 (online)

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2004) Својства на пултрудирани материјали со разни типови полимерна матрица. Proceedings of the XVIII Congress SHTM.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2013) Полимерни еко-композитни материјали. In: Materials engineering. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 87-101. ISBN 978-86-6253-015-8

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2014) Biocomposites based on polylactic acid and their thermal behavior after recycling. Macedonian Journal of Chemistry and Chemical Engineering. pp. 277-285. ISSN 1857-5552, e-ISSN 1857-5625

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Composite material based on an ablative phenolic resin and carbon fibers. Journal of the Serbian Chemical Society, 74 (4). pp. 441-453. ISSN 0352-5139 (Print) 1820-7421 (Online)

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2018) FRICTION MECHANISM OF POLYMERS AND THEIR COMPOSITES. Macedonian Journal of Chemistry and Chemical Engineering, 37 (1). pp. 1-11. ISSN 1857-5552

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Korisčenje recikliranih polimernih matrica za prozvodnju eko-kompozita. Knjiga radova. ISSN 978-99955-625-2-6

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (1999) Opredeluvanje na optimalni uslovi za dobivanje na pres masa vrz baza na karbonizirani vlakna i fenol-formaldehidna smola za visokotemperaturna namena. Proceedings of the XVI Congress SHTM.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2010) Preparation and characterization of lignocellulosic material filled eco-composites. In: XII YUCORR International Conference, 18-21 May 2010, Tara.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Preparation and recycling of polymer eco-composites i. Comparison of the conventional molding techniques for preparation of polymer eco-composites. Macedonian Journal of Chemistry and Chemical Engineering, 28 (1). pp. 99-109. ISSN 1857–5552

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2004) Properties of pultruded composites with different polymer matrices. Proceedings of the XVIII Congress SHTM.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2011) Utilization of recycled polymer matrices for production of eco-composites. Quality of Life, 1 (2-4). pp. 139-146.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2010) Utilization of recycled polymer matrices for production of eco-composites. Quality of Life, 1 (2-4). pp. 139-146. ISSN 1986-602X

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Utilization of recycled polymer matrices for production of eco-composites. XI YUCOR Proceedings. ISSN 978-86-82343

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2001) Utjecaj procesnih parametara i duljine ugljikovih vlakana na mehanička i toplinska svojstva fenolnih kompozita. Polimerni kompoziti.

Srebrenkoska, Vineta and Capeska Bogtinoska, Dijana (2011) Industrial symbiosis and eco-industrial networks. Proceedings of the International Scientific Conference Renewable Energy Sources and Sustainable Development. ISSN 978-99955-49-72-5

Srebrenkoska, Vineta and Capeska Bogtinoska, Dijana (2012) Waste treatment from polymer composite materials. Proceedings of the XXII International Congress of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta and Demboski, Goran and Bogoeva-Gaceva, Gordana and Zhezhova, Silvana (2013) Preparation and characterization of composites based on textile waste. In: 8th International Conference of the Chemical Societies of the South-East European Countries ICOSECS 8, 27-27 June 2013, Faculty of technology, Belgrade, Serbia.

Srebrenkoska, Vineta and Dimeski, Dimko (2009) Development of new actuators, materials and technology for the production of advanced pneumatic and hydraulic valves. [Experiment]

Srebrenkoska, Vineta and Dimeski, Dimko (2009) Еурека проект “Development of new actuators, materials and tehnology for the production of advanced pneumatic and hydraulic valves”. [Experiment]

Srebrenkoska, Vineta and Dimeski, Dimko (2016) End of life treatment of polymer composite materials. In: GREDIT’2016 – Green Development Infrastucture Technology, 31 March - 02 Apr 2016, Skopje, Macedonia.

Srebrenkoska, Vineta and Dimeski, Dimko and Basoski, Gorgi (2002) Термичка карактеризација на композитен материјал за вградување во противградна ракета. Proceedings of first simposyum of explosive materials, weapons and military technology .

Srebrenkoska, Vineta and Dimeski, Dimko and Basoski, Gorgi and Smileski, Rose (2003) Механички и термички карактеристики на композитен материјал за вградување во противградна ракета. III Советување за дупчење и минирање со меѓународно учество, Охрид, 28-31 мај 2003, Зборник на трудови, Рударско-геолошки факултет Штип. pp. 264-274.

Srebrenkoska, Vineta and Dimeski, Dimko and Basoski, Gorgi and Smileski, Rose (2003) Mechanical and thermal properties of composite material for anti-hail rockets. Confrence Proceedings, III Conference on Drilling and Blasting.

Srebrenkoska, Vineta and Dimeski, Dimko and Basovski, Gorgi (2001) Comparative ballistic characteristics of composite material based on polyethylene and ARAMID reinforcing fibers. Proceedings of the XXI simpozijum o eksplozivnim materijama JKEM.

Srebrenkoska, Vineta and Dimeski, Dimko and Basovski, Gorgi (2001) Mehanicke i toplotne karakteristike kompozitnog materijala za ugradnji u raketnoj tehnici. Proceedings of the XXI simpozijum o eksplozivnim materijama JKEM.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2013) Композитни материјали. In: Materials engineering. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 76-87. ISBN 978-86-6253-015-8

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2016) Application of Factorial Experimental Design in Predicting Mechanical Properties of Polypropylene based Composites. International Journal of Engineering Research & Technology (IJERT), 5 (2). pp. 95-99. ISSN 2278-0181

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2018) Friction mechanism of polymers and their composites. Macedonian Journal of Chemistry and Chemical Engineering, 37 (1). pp. 1-22. ISSN 1857-5552; Online 1857-5625

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2002) Thermal properties of ablative phenolic resins. Proceedings of the XVII Congress of SHTM (P-P16).

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2001) The influence of processing parameters and length of carbon fibres on mechanical and thermal properties of phenolic based composites. Polimerni kompoziti.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Grozdanov, Anita and Buzarovska, Aleksandra (2006) Caracterization of kenaf / pla composites. Proceedings, ICOSECS 5 - International Conference of the Chemical Societies of the South-East European Countries.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Herakovic, Niko and Stefov, Viktor (2010) Development of new actuators, materials and technology for the production of advanced pneumatic and hydraulic valves-materials selection. Book of Abstracts, XXI Congress of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Stefov, Viktor and Herakovic, Niko and Nasov, Ilija (2010) E!4548 De-Amatech: Development of new actuators, materials and technology for the production of advanced pneumatic and hydraulic valves. Book of Abstracts, XXI Congress of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta and Dimeski, Dimko and Capeska Bogtinoska, Dijana (2013) Студија на случај 1: Рециклирање и обновување на енергијата од отпадни полимерни композити. In: Инженерство на материјали. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 239-252.

Srebrenkoska, Vineta and Dimeski, Dimko and Spaseska, Dijana and Smileski, Rose (2003) Influence of molding pressure on blunt trauma effect and ballistic properties of unidirectional and bidirectional composites based on ultra high molecular weight polyethylene fibers. Conference Proceedings, III Conference on Drilling and Blasting.

Srebrenkoska, Vineta and Dimeski, Dimko and Zhezhova, Silvana (2013) Третман на крајот од животот на полимерните композитни материјали. In: Инженерство на материјали. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 209-239. ISBN 978-86-6253-015-8

Srebrenkoska, Vineta and Dimzoski, Bojan and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Recycling ability of the polypropylene for production of the natural fiber composites. Proceedings of the Seminar of Ecology. ISSN 978-954-397-015-5

Srebrenkoska, Vineta and Ducman, Vilma and Sever Skapin, Adrijana and Fidancevska, Emilija and Angusheva, Biljana and Jovanov, Vojo (2016) Investigation of the possibilities for application of NORM into polymer materials. In: V International Conference on Environmental Protection V. Terrestrial Radioisotopes in Environment, 17-20 May 2016, Veszprem, Hungary.

Srebrenkoska, Vineta and Fidancevska, Emilija (2012) Environmental issues in materials science and engineering. Conference Proceedings, XIV YUCORR International Conference. ISSN 978-86-82343-14-1

Srebrenkoska, Vineta and Fidancevska, Emilija (2013) Environmental issues in materials science and engineering. Materials Protection, 2 (54). pp. 167-174. ISSN 0351-9465

Srebrenkoska, Vineta and Fidancevska, Emilija and Blazevska Gilev, Jadranka and Lisickov, Kiril (2012) Role of technology. Technologica Acta, 5 (2). pp. 14-21. ISSN 1840-0426/ 2232-7568 (Online)

Srebrenkoska, Vineta and Fidancevska, Emilija and Blazevska Gilev, Jadranka and Lisickov, Kiril (2012) Role of technology as a basis of cleaner production. Proceedings of 2nd International Conference Environmental and Tourism Potentials.

Srebrenkoska, Vineta and Fidancevska, Emilija and Jovanov, Vojo and Angusheva, Biljana (2013) Sustainable technology and natural environment. Proceedings of XXI international Scientific and Professional Meeting "Ecological Truth" ECO-IST'13. pp. 238-242.

Srebrenkoska, Vineta and Golomeova, Saska and Zhezhova, Silvana (2013) Solid waste management. In: Sustainable technologies. Univerzitet u Novom Sadu, Tehnoloski fakultet, Novi Sad, Srbija, pp. 221-230. ISBN 978-86-6253-011-0 CIP

Srebrenkoska, Vineta and Jasic, Midhat and Sokolovic, Slobodan and Cvrk, Ramzija (2013) Environmental sustainability and industry. In: Sustainable technologies. Univerzitet u Novom Sadu, Tehnološki fakultet , Novi Sad, Srbija, pp. 55-72. ISBN 978-86-6253-011-0

Srebrenkoska, Vineta and Kotynia, Renata and Bojanowski, Krzysztof and Zhezhova, Silvana (2015) Mechanical characterization of the filament wound pipes for construction. In: Working Group Meeting Next Generation Design Guidelines for Composites in Construction, Lecce, Italy, 19-21 May 2015, Lecce, Italy. (Unpublished)

Srebrenkoska, Vineta and Lisickov, Kiril and Fidancevska, Emilija and Blazevska Gilev, Jadranka (2012) Sustainable technologies as a basis of cleaner production. Conference Proceedings, XIV YUCORR International Conference. ISSN 978-86-82343-14-1

Srebrenkoska, Vineta and Luceski, Nikola and Bogoeva-Gaceva, Gordana (2004) Properties of the pultruded composites reinforced with glass fibers. In: XVIII конгрес на хемичарите и технолозите на Македонија, 23-25 Sept 2004, Охрид.

Srebrenkoska, Vineta and Mitrev, Sasa and Atanasova-Pacemska, Tatjana and Karov, Ilija (2014) Lifelong learning for creativity and innovation. In: UNITECH'14 - International Scientific Conference, 21-22 Nov 2014, Gabrovo, Bulgaria.

Srebrenkoska, Vineta and Naseva, Simona and Risteska, Svetlana and Stefanoska, Maja and Srebrenkoska, Sara (2015) Effects of winding angles on mechanical properties of filament wound pipes. In: IV International Congress “Engineering, Environment and Materials in Processing Industry, 04-06 March 2015, Jahorina, Bosnia and Herzegovina.

Srebrenkoska, Vineta and Risteska, Svetlana (2015) Active and intelligent fibre-based packaging - innovation and market introduction (ActInPak). [Project] (In Press)

Srebrenkoska, Vineta and Risteska, Svetlana and Mijajlovikj, Maja (2015) Thermal Stability and Hoop Tensile Properties of Glass Fiber Composite Pipes. International Journal of Engineering Research & Technology (IJERT), 4 (12). pp. 297-302. ISSN 2278-0181

Srebrenkoska, Vineta and Risteska, Svetlana and Mijajlovikj, Maja and Srebrenkoska, Sara and Zhezhova, Silvana (2016) Mechanical and thermal properties of filament wound composite pipes. In: VII International Metallurgy Congress, Metallurgy, Materials and Environmental, 09-12 June 2016, Ohrid, Macedonia. (Unpublished)

Srebrenkoska, Vineta and Risteska, Svetlana and Srebrenkoska, Sara (2014) Production of filament wound composite tubes for construction. In: Present and Future of FRP in Construction, 23 Oct 2014, Technical University-Kaiserslautern, Germany. (Unpublished)

Srebrenkoska, Vineta and Risteski, Sanja (2013) Air protection. In: Sustainable technologies. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 209-219. ISBN 978-86-6253-011-0

Srebrenkoska, Vineta and Risteski, Sanja (2011) Design of protective clothes. Conference Proceedings. ISSN 0352-6542

Srebrenkoska, Vineta and Van Acker, Mark and Jasic, Midhat and Fidancevska, Emilija and Grujic, Radoslav (2011) Sustainable technology and alternative energy sources in the food industry. Proceedings of the International Scientific Conference Renewable Energy Sources and Sustainable Development. ISSN 978-99955-49-72-5

Srebrenkoska, Vineta and Zhezhova, Silvana and Golomeova, Saska (2013) Treatment of textile wastes. In: Sustainable technologies and chemical industry. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 129-152. ISBN 978-86-6253-014-1

Srebrenkoska, Vineta and Zhezhova, Silvana and Naseva, Simona (2015) Hoop tensile properties of filament wound pipes. In: XII International Congress Machines, Technologies, Materials 2015, 16-19 Sept 2015, Varna, Bulgaria.

Srebrenkoska, Vineta and Zhezhova, Silvana and Naseva, Simona (2015) Hoop tensile properties of filament wound pipes. Machines, Technologies, Materials, 9 (11). pp. 28-31. ISSN 1313-0226

Stefanov, Vasko and Mijalkovski, Stojance and Despodov, Zoran and Bonev, Ivan and Mirakovski, Dejan (2023) Избор на локација на фабрика. In: XIV Стручно советување со меѓународно учество од областа на подземната и површинската експлоатација на минералните суровини, Подекс - Повекс 2023, 6-8 Oct 2023, Ohrid.

Stefanov, Mile and Smileski, Rose and Trajkovska - Petkoska, Anka (2003) Производство и примена на експлозивна материја АН-ФО МАК-1. III Советување за дупчење и минирање со меѓународно учество, Охрид, 28-31 мај 2003, Зборник на трудови, Рударско-геолошки факултет - Штип. pp. 381-392.

Stefanov, Mile and Smileski, Rose and Trajkovska - Petkoska, Anka (2002) Техника и технологија за производство на експлозивна материја „АН-ФО МАК-1“ и негова масовна примена во рудниците за примарни минирања на метали и неметали. Зборник на трудови од „Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија“, Охрид, 25-28 Sept 2002. pp. 173-182.

Stoicovska, Marija and Vielickova, Frosina and Srebrenkoska, Sara and Risteska, Svetlana and Risteski, Sanja and Srebrenkoska, Vineta (2023) Utilizing Vacuum Bagging Process to Prepare Carbon/Epoxy Composite Laminates. Contemporary trends and innovations in the textile industry. pp. 181-185. ISSN ISBN: 978-86-900426-6-1

Stojkovikj, Sasho and El-Nagar, Gumaa A. and Firschke, Frederik and Najdoski, Metodija and Koleva, Violeta and Mayer, Matthew T. (2020) Novel and Facile Synthesis of Cu2-xS-Based Electrocatalysts for Selective CO2 Conversion into HCOOH. In: 71st Annual Meeting of the International Society of Electrochemistry “Electrochemistry towards Excellence”, 30 Aug - 4 Sept 2020, Belgrade - online.

Stojkovikj, Sasho and El-Nagar, Gumaa A. and Firschke, Frederik and Pardo Pérez, Laura C. and Choubrac, Léo and Najdoski, Metodija and Mayer, Matthew T. (2021) Electrocatalyst Derived from Waste Cu–Sn Bronze for CO2 Conversion into CO. ACS Applied Materials & Interfaces, 13 (32). pp. 38161-38169. ISSN 1944-8244

Stojkovikj, Sasho and El-Nagar, Gumaa A. and Firschke, Frederik and Pardo Pérez, Laura C. and Choubrac, Léo and Najdoski, Metodija and Mayer, Matthew T. (2021) Repurposing Waste Cu-Sn Bronze for Selective CO2 Electroreduction into CO. In: Electrochemistry Group’s Electrochemistry 2021 virtual conference, 7-8 Sept 2021, Online (Twitter) Conference.

Stojkovikj, Sasho and El-Nagar, Gumaa A. and Gupta, Siddharth and Najdoski, Metodija and Koleva, Violeta and Tzanoudakis, Theocharis and Firschke, Frederik and Bogdanoff, Peter and Mayer, Matthew T. (2024) Facile Synthesis of CuxS Electrocatalysts for CO2 Conversion into Formate and Study of Relations Between Cu and S with the Selectivity. Advanced Functional Materials (241540). ISSN 1616-3028

Stojkovikj, Sasho and Koleva, Violeta and Najdoski, Metodija (2014) Chemical deposition of nano-sized electrochromic thin films of Na0.33V2O5 ∙ H2O xerogels. Nanoscience & Nanotechnology: Nanostructured materials application and innovation transfer, 14. pp. 67-69. ISSN 1313-8995

Stojkovikj, Sasho and Koleva, Violeta and Najdoski, Metodija (2013) Chemical deposition of nano-sized electrochromic thin films of Na0.33V2O5∙H2O xerogels. In: 15th International Workshop on Nanoscience & Nanotechnology, 21-23 Nov 2013, Sofia, Bulgaria.

Stojkovikj, Sasho and Koleva, Violeta and Najdoski, Metodija (2014) Electrochromic Vanadium Oxide Thin Films: From a Layered to a Tunnel Structure. In: XXIIIrd Congress of Chemists and Technologists of Macedonia, 8-11 Oct 2014, Ohrid, Macedonia.

Stojkovikj, Sasho and Koleva, Violeta and Najdoski, Metodija (2013) Influence of thermal treatment on the electrochromic properties of sodium intercalated vanadium(V) oxide xerogel thin films. In: 15th International Workshop on Nanoscience & Nanotechnology, 21-23 Nov 2013, Sofia, Bulgaria.

Stojkovikj, Sasho and Mirceski, Valentin and Najdoski, Metodija and Sefer, Birhan (2016) Application of Potassium Birnessite Thin Film/FTO Modified Electrodes as Nonenzymatic Sensors for Hydrogen Peroxide. In: 2nd International Congress of Chemists and Chemical Engineers of Bosnia and Herzegovina, 21-23 Aug 2016, Sarajevo, Bosnia and Herzegovina.

Stojkovikj, Sasho and Mirceski, Valentin and Najdoski, Metodija and Sefer, Birhan (2016) Design of Nonenzymatic Amperometric Sensor for H2O2 Based on Electrodes Modified with Nanoscaled MnCO3 Thin Films. In: 2nd International Congress of Chemists and Chemical Engineers of Bosnia and Herzegovina, 21-23 Oct 2016, Sarajevo, Bosnia and Herzegovina.

Stojkovikj, Sasho and Mirceski, Valentin and Sefer, Birhan and Najdoski, Metodija (2016) Design of Amperometric Sensors for H2O2 based on K0.27MnO2·xH2O Thin Films. In: MatCatNet Workshop - From Molecules to Functionalized Materials, 1-5 Sept 2016, Ohrid, Macedonia.

Stojkovikj, Sasho and Najdoski, Metodija and Demiri, Sani (2011) Chemical Bath Coating and Characterisation of Electrochromic Manganese(II) Carbonate Thin Films. In: IXth Congress of Pure and Applied Chemistry of Students from Macedonia (with International participation), 6-8 Oct 2011, Skopje, Macedonia.

Stojkovikj, Sasho and Najdoski, Metodija and Demiri, Sani and Koleva, Violeta (2011) Electrochromic K0.27MnO2 · 0.6H2O Thin Films Deposition on Glass Substrates using Dip Coating Method. In: IXth Congress of Pure and Applied Chemistry of Students from Macedonia (with international participation), 6-8 Oct 2011, Skopje, Macedonia.

Stojkovikj, Sasho and Najdoski, Metodija and Koleva, Violeta and Demiri, Sani (2013) Preparation of electrochromic thin films by transformation of manganese(II) carbonate. Journal of Physics and Chemistry of Solids, 74 (10). pp. 1433-1438. ISSN 1879-2553

Stojkovikj, Sasho and Najdoski, Metodija and Koleva, Violeta and Mayer, Matthew T. (2019) Study of Copper/Cuprous Sulfide Composites as Catalysts for Electrochemical Reduction of Carbon Dioxide. In: 17th International Conference on Carbon Dioxide Utilization - ICCDU 2019, 23-27 June 2019, Aachen, Germany.

Stojkovikj, Sasho and Najdoski, Metodija and Sefer, Birhan and Mirceski, Valentin (2014) Development of Nonenzymatic Amperometric Sensor for Detection of Hydrogen Peroxide Based on Manganese(II) Carbonate Thin Films. In: MatCatNet Workshop - From Molecules to Functionalized Materials, 5-10 Sept 2014, Ohrid, Macedonia.

Stojkovikj, Sasho and Najdoski, Metodija and Sefer, Birhan and Mirceski, Valentin (2019) Non–enzymatic Amperometric Sensor for H2O2 Based on MnCO3 Thin Film Electrodes. Croatica Chemica Acta, 91 (4). pp. 567-575. ISSN 1334-417X

Stojkovikj, Sasho and Oklevski, Slobodan and Jasuja, Om Prakash and Najdoski, Metodija (2020) Visualization of latent fingermarks on thermal paper: A new method based on nitrogen dioxide treatment. Forensic Chemistry, 17 (100196). ISSN 2468-1709

T

Taskovski, Stanke and Gocevski, Borce and Hadzi-Nikolova, Marija and Mijalkovski, Stojance (2023) Методологија за истраги на инциденти на работни места. In: XIV Стручно советување со меѓународно учество од областа на подземната и површинската експлоатација на минералните суровини, Подекс - Повекс 2023, 6-8 Oct 2023, Ohrid.

Taskovski, Stanke and Gocevski, Borce and Mijalkovski, Stojance and Hadzi-Nikolova, Marija (2024) Унапредување на безбедноста во рударската индустрија преку подобрување на безбедносната култура и лидерство за безбедност. In: XV-то Стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс - Повекс, 18-20 Oct 2024, Struga.

Taskovski, Stanke and Gocevski, Borce and Hadzi-Nikolova, Marija and Mijalkovski, Stojance (2017) Safety working in confined space. In: X Стручно советување со меѓународно учество Подекс – Повекс ’17, 03-05 Nov 2017, Ohrid, Macedonia.

Taskovski, Stanke and Gocevski, Borce and Mijalkovski, Stojance (2016) Securing (manual scaling) of underground workplaces. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Nov 2016, Strumica, Macedonia.

Temelkoska, Bratica (2014) Микроструктурни и механички промени на челици отпорни на повишени температури во експлоатациони услови. Documentation. CIP - Каталогизација во публикација Национална и универзитетска библиотека "Св. Климент Охридски", Скопје 669.14.018.44-2(075.8) 669.14.018.45-2(075.8), Штип.

Temelkoska, Bratica and Cvetanoski, Radomir (2015) Usability of high pressure steam pipelines in Thermal Power Planst for exploatacion after the expiry of designed period. Tehnika, 64 (6). pp. 982-988. ISSN 0040-2176

Tokuda, Ryutaro and Noguchi, So and Yamashita, Hideo and Cingoski, Vlatko (2000) Speed-up for 3D Finite Element Analysis by Using Multigrid Method. In: Proceeding of the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Applied Electromagnetics (3). National University Library "St. Kliment Ohridski", Skopje, Ohrid, Macedonia, pp. 12-16. ISBN 9989-57-094-9

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Analysis of the possible influence in determining of the roughness profile in real non-periodic surfaces by application of Gaussian and 2RC filters. In: 33rd Naukowa Szkoła Obróbki Sciernej, Politechnika Łódzka, Wydział Mechaniczny, 8-10 Sept 2010, Lodz, Poland.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Investigation of the function and influence of Gaussian and 2RC filters to determine of roughness profile on real periodic surfaces. In: IV Konferencja Naukowa, Szkoła Obróbki Skrawaniem, Politechnika Łódzka, Wydział Mechaniczny, 6-8 Sept 2010, Lodz, Poland.

Tomov, Mite and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Function on Gaussian and 2RC filters to determine the roughness profile in real non-periodic and periodic surfaces. In: 14-th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2010, 11-18 Sept 2010, Mediterranean Cruise.

Tomovska, Elena and Jordeva, Sonja and Trajković, Dušan and Zafirova, Koleta (2017) Attitudes towards managing post-industrial apparel cuttings waste. The Journal of the Textile Institute. ISSN 0040-5000 (Print), 1754-2340 (Online)

Tomovska, Elena and Jordeva, Sonja and Trajković, Dušan and Zafirova, Koleta (2014) Pre-consumer apparel waste mangement in Macedonia. Book of proceedings 6 th International Conference of Textile. pp. 247-253.

Tomovska, Elena and Jordeva, Sonja and Zafirova, Koleta (2016) Contribution of texture to aesthetic properties. In: 7-th International conference of textile, 10-11 Nov 2016, Tirana, Albania.

Tomovska, Elena and Jordeva, Sonja and Zafirova, Koleta (2016) Visual perception of pantyhose texture. In: XXIV Congress of Chemists and Technologists of Macedonia, 11-14 Sep 2016, Ohrid, R. Macedonia.

Trajchevski, Neven and Filiposki, Velimir and Kuzinovski, Mikolaj (2004) Personal computer interface for temperature measuring in the cutting process with turning. Proceedings, Faculty of Mechanical Engineering - Skopje, 23 (2). pp. 65-74. ISSN 0351-6067

Trajchevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 47-50. ISSN 1821-4932

Trajchevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Trajchevski, Neven and Kuzinovski, Mikolaj and Filiposki, Velimir and Cichosz, Piotr (2004) Computer aided measurement of the temperature in the cutting process by machining with turning. In: Proceedings of the scientific conference with international participation "Manufacturing and menagement in 21-st century", 16-17 Sept 2004, Ohrid, Republic of Macedonia.

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2018) Reducing of process model uncertainty towards smart machining systems. Mechanik (10). pp. 877-879. ISSN 0025-6552

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Cichosz, Piotr (2015) Introducing of measurement uncertainty in empirical power models of physical phenomena during machining processes. Mechanik (08/09). pp. 55-62. ISSN 0025-6552

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Cichosz, Piotr (2015) Introducing of measurement uncertainty in empirical power models of physical phenomena during machining processes. In: IX Konferencji Szkoły Obróbki Skrawaniem, 23-25 Sept 2015, Kielce-Sandomierz.

Trajković, Dušan and Jordeva, Sonja and Tomovska, Elena and Zafirova, Koleta (2017) Polyester Apparel Cutting Waste as Insulation Material. The Journal of the Textile Institute, 108 (7). pp. 1238-1245. ISSN 0040-5000 (Print), 1754-2340 (Online)

Trajković, Dušan and Jordeva, Sonja and Zafirova, Koleta and Stepanovic, Jovan and Tomovska, Elena (2015) Razvoj novih i unapreĎenje postojećih postupaka proizvodnje tehničkih tekstilnih materijala”. [Project]

V

Velichkovska, Frosina and Stojchevska, Maja and Srebrenkoska, Sara and Risteska, Svetlana and Srebrenkoska, Vineta (2023) Properties of Composite Parts Manufactured using UD Carbon Fiber/Epoxy Prepreg. International Journal of Engineering Research & Technology (IJERT), 12 (06). pp. 29-33. ISSN 2278-0181

Velkova Krstev, Angela and Krstev, Aleksandar (2021) Водечки принципи за иден развој при проектирање на клиничка болница. Natural Resources and Technology, 15 (2). pp. 83-91.

Velkova Krstev, Angela and Krstev, Aleksandar (2021) Мултидимензионални придобивки од проектирање на клинички болници со водечки принципи за иден развој. Natural Resources and Technology, 15 (2). pp. 93-103.

Vujičić, Vladimir and Radeka, Radmila and Smileski, Rose and Zibert, Alojz (1987) Određivanje brzine korozije metala metodom brojanja mjehurića vodika. Vojnotehnicki glasnik, 2 (87). pp. 209-214. ISSN 0042-8469

Y

Yamashita, Hideo and Namera, Akihiro and Cingoski, Vlatko and Kaneda, Kazufumi and Nakayama, Michio (1995) Simulation of Induction Heating of Steel Billet Considering its Movement using 3-D FEM (in Japanese). Journal of Japan Society of Applied Electromagnetics and Mechanics, 3 (3). pp. 16-20.

Z

Zavargo, Zoltan and Srebrenkoska, Vineta and Fidancevska, Emilija and Jasic, Midhat and Cakic, Milorad and Grujic, Radoslav (2013) Dissemination Booklet. [Project]

Zendelska, Afrodita and Trajanova, Adrijana and Golomeova, Mirjana and Golomeov, Blagoj and Mirakovski, Dejan and Doneva, Nikolinka and Hadzi-Nikolova, Marija (2022) Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage. Journal of Mining and Environment, 13 (3). pp. 679-691. ISSN Print ISSN: 2251-8592 Online ISSN: 2251-8606

Zendelska, Afrodita and Trajanova, Adrijana and Golomeova, Mirjana and Golomeov, Blagoj and Mirakovski, Dejan and Doneva, Nikolinka and Hadzi-Nikolova, Marija (2022) Use of neutralizing agens in the removal of heavy metals from acid mine drainage. In: XIII Expert conference themed: Technology of underground and surface mining of mineral raw materials "Podex – Poveks" ’22, 14-16 October 2022, Ohrid.

Zendelska, Afrodita and Golomeova, Mirjana and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj and Krstev, Aleksandar (2015) Adsorption of copper ions from aqueous solutions on natural zeolite. Environment Protection Engineering, 41 (4). pp. 17-36. ISSN 0324-8828 (print) 2450-260X (online)

Zendelska, Afrodita and Golomeova, Mirjana and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj and Krstev, Aleksandar and Jakupi, Shaban (2014) Equilibrium studies of manganese removal from aqueous solution by adsorption on natural zeolite. In: VI International Metallurgical Congress, 29 May-01 June 2014, Ohrid, Macedonia.

Zendelska, Afrodita and Golomeova, Mirjana and Golomeov, Blagoj (2019) Comparison of sieve analysis and the laser diffraction method. In: XII Стручно советување од областа на подземната и површинската експлоатација (Подекс-Повекс 2019), 01-03 Nov 2019, Strumica, Macedonia.

Zendelska, Afrodita and Golomeova, Mirjana and Golomeov, Blagoj and Krstev, Boris (2016) Characteristics and application on raw materials for metals removal from aqueous solutions. In: Podeks-Poveks'16, 11-13 Nov 2016, Strumica, Macedonia.

Zendelska, Afrodita and Golomeova, Mirjana and Golomeov, Blagoj and Krstev, Boris (2016) Possibilities for use of natural raw materials for removal of heavy metals from aqueous solutions. In: 16th International Multidisciplinary Scientific GeoConference SGEM 2016, 28 June-6 July 2016, Albena, Bulgaria.

Zendelska, Afrodita and Golomeova, Mirjana and Jakupi, Shaban and Lisichkov, Kiril and Kuvendziev, Stefan and Marinkovski, Mirko (2018) Characterization and application of clinoptilolite for removal of heavy metal ions from water resources. Geologica Macedonica, 32 (1). pp. 21-32. ISSN 0352-1206

Zendelska, Afrodita and Golomeova, Mirjana and Krstev, Boris and Golomeov, Blagoj (2017) Removal of heavy metals from mine wastewater from mines Sasa and Buchim, Macedonia using zeolite bearing tuff. In: XVII Balkan Mineral Processing Congress, 1-3 Nov 2017, Antalya, Turkey.

Zeqiri, Kemajl and Hetemi, Muhamedin and Uka, Ujmir and Ibishi, Gzim and Mijalkovski, Stojance (2022) Analysis of near-miss incidents (NMI) reporting in mining operations. Mining of Mineral Deposits, 16 (3). pp. 25-30. ISSN 2415-3443

Zeqiri, Kemajl and Mijalkovski, Stojance and Gzim, Ibishi and Mojsiu Lavdie, Ledi (2024) Comprehensive analysis of the mining accident forecasting and risk assessment methodologies: Case study – Stanterg Mine. Mining of Mineral Deposits, 18 (2). pp. 11-17. ISSN 2415-3443

Zeqiri, Kemajl and Kortnik, Joze and Mijalkovski, Stojance (2020) Determination of the risk at workplace, assessment and its rank calculation, in mining activities. GeoScience Engineering, 66 (1). pp. 69-75. ISSN 1802-5420

Zhezhova, Silvana and Jordeva, Sonja and Golomeova, Saska and Jovanov, Stojanche (2021) Application of technical textile in medicine. Tekstilna industrija, 69 (2). pp. 21-29. ISSN 0040-2389

Zhezhova, Silvana and Jordeva, Sonja and Golomeova, Saska and Srebrenkoska, Vineta and Dimitrijeva-Kuzmanoska, Vanga (2022) Analysis of the situation with textile waste. Contemporary trends and innovations in the textile industry. pp. 226-234.

Zhezhova, Silvana and Jordeva, Sonja and Golomeova, Saska and Srebrenkoska, Vineta and Dimitrijeva-Kuzmanoska, Vanga (2022) Analysis of the situation with textile waste. In: Contemporary trends and innovations in the textile industry.

Zhezhova, Silvana (2011) Оптимизација на технолошкиот процес на кроење за ефикасно искористување на материјалите. Masters thesis, Технолошко-металуршки факултет- УКИМ- Скопје.

Zhezhova, Silvana (2018) Application of textile in different forms and contemporary technologies for obtaining polymer composite structures. PhD thesis, Goce Delcev University, Stip.

Zhezhova, Silvana and Demboski, Goran (2005) Проектирање на линија за монтажа на џинс фармерки. In: Шести конгрес по чиста и применета хемија на студентите од Македонија, 1.12.2005, Технолошко-металуршки факултет, Скопје.

Zhezhova, Silvana and Demboski, Goran (2011) Determination of generated textile waste in clothing companies of different technological level. Textile Science and Economy. ISSN 978-86-7672-150-4

Zhezhova, Silvana and Demboski, Goran and Panov, Vlatko (2013) Optimization of technological process of cutting by use of software applications for cut order planning. Tekstil i obleklo (3). pp. 77-79.

Zhezhova, Silvana and Demboski, Goran and Srebrenkoska, Vineta and Jordeva, Sonja and Golomeova, Saska (2019) The influence of the type and width of the cut marker on the utilization of textile materials. Advanced technologies, 8 (2). pp. 99-104. ISSN 2217-9720

Zhezhova, Silvana and Janevski, Aco and Jordeva, Sonja and Andronikov, Darko and Mojsov, Kiro (2017) Apparel Industry in Macedonia, Conditions and Challenges. Xii Simpozijum „Savremene tehnologije i privredni razvoj“. pp. 141-147. ISSN 978-86-89429-25-1

Zhezhova, Silvana and Jordeva, Sonja and Golomeova, Saska and Dimitrijeva, Vanga and Dimova, Tanja (2019) Tactile properties of fabrics. Tekstilna industrija. pp. 4-10. ISSN 0040-2389

Zhezhova, Silvana and Risteski, Sanja and Ristova, Elvira and Risteska, Svetlana and Srebrenkoska, Vineta (2018) Composite materials based on e-glass woven textile structures as reinforcement. Tekstilna industrija, 66 (2). pp. 4-8. ISSN 0040-2389

Zhezhova, Silvana and Risteski, Sanja and Ristova, Elvira and Srebrenkoska, Vineta and Risteska, Svetlana (2018) Mechanical characterization of glass fabric / epoxy composites. In: International scientific conference: Contemporary trends and innovations in the textile industry, 18 May 2018, Belgrade, Serbia.

Zhezhova, Silvana and Risteski, Sanja and Srebrenkoska, Vineta (2017) Fibrous structures as a reinforcement for composite materials. Tekstilna industrija, 64 (4). pp. 1-76. ISSN 0040-2389

Zhezhova, Silvana and Risteski, Sanja and Srebrenkoska, Vineta (2017) Polimerni kompozita bazirani tekstila sa razlicitim geometrije. In: V međunarodni kongres “Inženjerstvo, ekologija i materijali u procesnoj industriji”, 15 March 2017, Jahorina, BiH.

Zhezhova, Silvana and Risteski, Sanja and Srebrenkoska, Vineta (2017) Polymer composite based of textiles in various geometry. V International Congress “Engineering, Environment and Materials in Processing Industry“. ISSN 978-99955-81-21-3

Zhezhova, Silvana and Srebrenkoska, Vineta and Demboski, Goran (2011) Using of textile waste for production of composite materials. Conference Proceedings, XIII YUCORR International Conference. ISSN 978-86-82343-14-1

Zhezhova, Silvana and Srebrenkoska, Vineta and Risteska, Svetlana and Risteski, Sanja (2018) Predicting the flexsural strength of textile composites based on glass fabrics. In: VIII International Metallurgical Congress, 30 May-3 June 2018, Ohrid, Macedonia.

Zlatev, Zoran and Golubovski, Roman and Gicev, Vlado (2016) Data processing of displacements between the ground and the point of cracking at the seven – story Van Nuys Hotel. In: The 7th International Conference "Information Technologies and Education Development – ITRO" 2016, 10 June 2016, Zrenjanin, Serbia.

Zlatkov, Ivan and Zhezhova, Silvana and Risteski, Sanja and Srebrenkoska, Vineta and Risteska, Svetlana (2019) Effect of weave of fabric and molding pressure on the mechanical properties of composite laminates. Contemporary trends and innovations in the textile industry. pp. 391-396. ISSN 978-86-900426-1-6